CHANNEL OPERATING FREQUENCIES
To change the operating frequency of a channel:
|
| With the transceiver power OFF, press |
|
| and hold the PTT switch and Lock key |
1 |
| while turning the transceiver power ON. |
| Continue to hold the PTT switch and Lock | |
| 1 | |
|
| key until the LED lights orange and the |
|
| transceiver announces “Self”. |
Release the PTT switch and Lock key.
2 | The transceiver announces “Channel”. | |
Pressing the Lock key or Scan key will toggle between QT, | ||
| ||
| DQT, and Channel setup. |
|
| Press and release the PTT switch, then |
|
| rotate the Channel selector to your |
3 |
| desired channel. |
1 | Upon pressing and releasing the PTT | |
|
| switch, the transceiver announces |
|
| “Table zero”. |
|
| Press the Lock key to increment the |
|
| Table number or the Scan key to |
|
| decrement the number, to select the |
|
| new channel frequency. |
|
| Press and hold the Lock or Scan key to |
4 |
| increment/ decrement the number by |
5 at a time.
Table numbers and their corresponding operating frequencies are provided in the table on page 19.
A voice announcement will inform you of the currently selected Table number.
18