6
1
ACCESSORY CONNECTIONSEXTERNAL SPEAKER
If you plan to use an external speaker, choose a speaker
with an impedance of 8 Ω. The external speaker jack
accepts a 3.5 mm (1/8") mono (2-conductor) plug. We
recommend using the SP-50B speaker.
MICROPHONE
For voice communications, connect a 600 Ω microphone
equipped with an 8-pin modular plug into the modular
socket on the front of the main unit. Press firmly on the
plug until the locking tab clicks.
Attach the supplied microphone hanger in an appropriate
location using the screws included in the screw set.
Microphone hanger
Microphone
hanger screw
(3 mm x 10 mm)
Keypad serial data
No Connection
MIC, 600 Ω impedance
GND (MIC)
PTT
GND
DC 8 V, 100 mA max
No Connection
PC CONNECTION
To utilize the optional MCP-1A software, you must first
connect the transceiver to your PC using an optional.
Programming Cable (via the microphone jack).
The MCP-1A is free downloadable software available
from KENWOOD at the following URL:
http://www.kenwood.com/i/products/info/amateur.html
Note: Ask your dealer about purchasing a Programming Cable.