24
6
ACTIVATING THE TONE FUNCTION
To activate Tone, press [F], [CALL].
•As you press [F], [CALL], the selection cycles as follows:
“OFF” ➞ “TONE” ➞ “CTCSS” ➞ “DCS” ➞ “OFF”.
•“T” appears on the upper part of display, indicating that the
Tone function is activated.
Note: You cannot use the Tone function and CTCSS/ DCS functions
simultaneously. Switching the Tone function ON after having activated
the CTCSS/ DCS functions deactivates the CTCSS/ DCS functions.
E market version only: When you access repeaters that require a
1750 Hz tone, you do not need to activate the Tone function. Simply
press [CALL] without pressing Mic [PTT] to transmit a 1750 Hz tone
(default setting).
SELECTING A TONE FREQUENCY
1Press [F], [MENU] and turn the Tuning control to
select Menu No. 2 (T).
2Press [MENU] and turn the Tuning control to select
the desired tone frequency (default is 88.5 Hz).
3Press [MENU] to store the setting or any other key to
cancel.
4Press any key other than [MENU] to exit Menu Mode.

Available Tone Frequencies

)zH(seicneuqerFenoT24

0.764.582.7015.6318.3711.812

3.965.889.0113.1419.9717.522

9.175.198.4112.6412.6811.922

4.478.498.8114.1518.2916.332

0.774.790.3217.6515.3028.142

7.970.0013.7212.2615.6023.052

5.285.3018.1319.7617.0121.452

Note: 42 different tones are available for the transceiver. These
42 tones includes 37 EIA standard tones and 5 non-standard tones.
E market version only:
◆To transmit a 1750 Hz tone, simply press [CALL] without pressing
Mic [PTT] (default setting). Release [CALL] to quit transmitting.
You can also make the transceiver remain in the transmit mode for
2 seconds after releasing [CALL]; a 1750 Hz tone is not
continuously transmitted. Access Menu No. 20 (HLD) and select
“ON”.
◆To use [CALL] for recalling the Call Channel in place of
transmitting a 1750 Hz tone, access Menu No. 19 (CK) and select
“CALL”.