39

8
SCAN

Scan is a useful function for hands-off monitoring of your

favorite frequencies. By becoming comfortable with all

types of scan, you will increase your operating efficiency.

This transceiver provides the following types of scans.

epyTnacS esopruP
lamroN
nacS
nacSdnaB ehtfodnaberitneehtsnacS
.detcelesuoyycneuqerf
margorP
nacS
ycneuqerfdeificepsehtsnacS
yromeMniderotssegnar
.2U/2L~0U/0LslennahC
nacSzHM anihtiwseicneuqerfehtsnacS
.egnarzHM1
yromeM
nacS
lennahC-llA
nacS
slennahCyromeMllasnacS
.)99ot0morfro(991ot0morf
nacSpuorG
nislennahCyromeMsnacS
,91~0(slennahc02fospuorg
.).cte,95~04,93~02
llaC
nacS
OFV dnalennahCllaCehtsnacS
.ycneuqerfOFVtnerruceht
yromeM
lennahC
dnalennahCllaCehtsnacS
.lennahCyromeMdetceleseht
nacSytiroirP
ehtnoseitivitcaehtskcehC
yreve)rP(lennahCytiroirP
.sdnoces3
Note:
◆When the CTCSS or DCS function is activated, the transceiver
stops at a busy frequency and decodes the CTCSS tone or DCS
code. If the tone or code matches, the transceiver unmutes.
Otherwise, it resumes scanning.
◆Press and hold the Mic PF key programmed as MONI {page 59}
to pause scan in order to monitor the scanning frequency.
Release the key to resume scanning.
◆Pressing and holding Mic [PTT] causes scan to stop (excluding
Priority Scan).
◆While scanning, you can change the scan frequency direction by
turning the Tuning control or using the Mic [UP]/[DWN] keys.
◆Starting scan switches OFF the Automatic Simplex Check (ASC)
{page 26}.
◆Adjust the Squelch level before using Scan {page 14}. Selecting a
Squelch level too low could cause Scan to stop immediately.