Kenwood TM-271, TM-271E VFO R

68

14

Full Reset Method 2:

1Press [F], [MENU] and turn the Tuning control to

select Menu No. 99 (RESET).

2Press [MENU] and turn the Tuning control to select

“FULL”.

3Press [MENU].

•“SURE ?” appears.

•Press any key other than [MENU] to cancel.

4Press [MENU] to reset the transceiver.

•“WAIT” appears momentarily.

VFO RESET

This resets the transceiver parameters excluding the

DTMF Memory, the Memory channel contents, and the

Call channel contents. There are two methods available

for resetting the transceiver.

Note: Menu No. 7 (P.VFO) and Menu No. 10 (OFFSET) return to the

factory default values.

VFO Reset Method 1:

1With the transceiver power OFF, press [VFO]+[ ]

(Power).

•The VFO reset confirmation message appears.

2Press [VFO].

•“SURE ?” appears.

•Press any key other than [VFO] to cancel.

3Press [VFO] again to reset the transceiver.

•“WAIT” appears momentarily.

VFO Reset Method 2:

1Press [F], [MENU] and turn the Tuning control to

select Menu No. 99 (RESET).

2Press [MENU] and turn the Tuning control to select

“VFO”.

3Press [MENU].

•“SURE ?” appears.

•Press any key other than [MENU] to cancel.

4Press [MENU] to reset the transceiver.

Contents

Main INSTRUCTION MANUAL THANK YOU! MODELS COVERED BY THIS MANUAL MARKET CODES FEATURES PRECAUTIONS NOTICES TO THE USER CONTENTS Page Page SUPPLIED ACCESSORIES WRITING CONVENTIONS FOLLOWED IN THIS MANUAL PREPARATION MOBILE INSTALLATION DC POWER CABLE CONNECTION M OBILE O FIXED STATION OPERATION REPLACING FUSES noitacoLesuF gnitaRtnerruCesuF reviecsnarTA51 yrosseccAdeilppuS elbaCrewoPCD A02 ANTENNA CONNECTION ACCESSORY CONNECTIONS EXTERNAL SPEAKER M PC C 7 CONNECTING TO A TNC (E MARKET MODELS ONLY) YOUR FIRST QSO GETTING ACQUAINTED FRONT PANEL tt tt tMR key uu DISPLAY Page REAR PANEL MICROPHONE MIC KEYPAD DIRECT ENTRY OPERATING BASICS SWITCHING THE POWER ON/OFF ADJUSTING THE VOLUME ADJUSTING THE SQUELCH TRANSMITTING SELECTING AN OUTPUT POWER SELECTING A FREQUENCY VFO M MHZ MODE DIRECT FREQUENCY ENTRY Example 1 Example 2 Example 3 MENU SETUP WHAT IS A MENU? MENU ACCESS MENU FUNCTION LIST Page Page OPERATING THROUGH REPEATERS OFFSET PROGRAMMING FLOW PROGRAMMING AN OFFSET SELECTING AN OFFSET DIRECTION SELECTING AN OFFSET FREQUENCY 24 ACTIVATING THE TONE FUNCTION To activate Tone, press [F], [CALL]. SELECTING A TONE FREQUENCY Available Tone Frequencies AUTOMATIC REPEATER OFFSET K market version only E market version only TRANSMITTING A 1750 Hz TONE REVERSE FUNCTION AUTOMATIC SIMPLEX CHECK (ASC) TONE FREQUENCY ID SCAN MEMORY CHANNELS NUMBER OF MEMORY CHANNELS SIMPLEX & REPEATER OR ODD-SPLIT MEMORY CHANNEL? STORING SIMPLEX FREQUENCIES OR STANDARD REPEATER FREQUENCIES STORING ODD-SPLIT REPEATER FREQUENCIES RECALLING A MEMORY CHANNEL USING THE TUNING CONTROL USING THE MICROPHONE KEYPAD CLEARING A MEMORY CHANNEL NAMING A MEMORY CHANNEL MEMORY CHANNEL TRANSFER MEMORY \ VFO TRANSFER CHANNEL \ CHANNEL TRANSFER 34 The tables below illustrate how data is transferred between Memory Channels. CALL CHANNEL RECALLING THE CALL CHANNEL REPROGRAMMING THE CALL CHANNEL WEATHER ALERT (K MARKET MODELS ONLY) PROGRAMMING THE WEATHER RADIO FREQUENCY ENABLING A WEATHER ALERT CHANNEL DISPLAY Page 39 SCAN NORMAL SCAN BAND SCAN PROGRAM SCAN MHZ SCAN MEMORY SCAN ALL-CHANNEL SCAN GROUP SCAN CALL SCAN PRIORITY SCAN PROGRAMMING A PRIORITY CHANNEL USING PRIORITY SCAN MEMORY CHANNEL LOCKOUT SCAN RESUME METHOD SELECTIVE CALL CTCSS AND DCS CTCSS SELECTING A CTCSS FREQUENCY Available CTCSS Tone Frequencies CTCSS F REQUENCY ID S DCS SELECTING A DCS CODE DCS CODE ID SCAN DUAL TONE MULTI-FREQUENCY (DTMF) FUNCTIONS MANUAL DIALING )zH(.qerF 9021 6331 7741 3361 796 123A 077 456B 258 789C 149 0#D DTMF M DTMF TX H AUTOMATIC DIALER STORING A DTMF NUMBER IN MEMORY CONFIRMING STORED DTMF NUMBERS TRANSMITTING A STORED DTMF NUMBER ADJUSTING THE DTMF TONE TRANSMISSION SPEED ADJUSTING THE PAUSE DURATION DTMF LOCK AUXILIARY FUNCTIONS APO (AUTO POWER OFF) BEAT SHIFT S-METER SQUELCH SQUELCH HANG TIME BEEP FUNCTION BUSY CHANNEL LOCKOUT FREQUENCY STEP SIZE DISPLAY BACKLIGHT PERMANENT BACKLIGHT AUTOMATIC BACKLIGHT LOCK FUNCTION DATA COMMUNICATION SPEED TUNE ENABLE MICROPHONE PF KEYS (KEYPAD MODELS ONLY) Programmable Functions NARROW BAND FM OPERATION POWER-ON MESSAGE PROGRAMMABLE VFO TIME-OUT TIMER MICROPHONE CONTROL MIC LOCK OPTIONAL ACCESSORIES TROUBLESHOOTING MAINTENANCE GENERAL INFORMATION S SERVICE NOTE C RESETTING THE TRANSCEIVER INITIAL SETTINGS FULL RESET Full Reset Method 1: VFO R VFO Reset Method 1: VFO Reset Method 2: 69 TROUBLESHOOTING Page SPECIFICATIONS Page INDEX