Kenwood TM-D710GA, TM-D710GE GPS 4, TARGET POINT, MARK WAYPOINT

GPS – 4
TARGET POINT
You can register positional information for a target point.
1 Enter Menu mode and access Menu 504.
2 Select a Target Point (from 1 ~ 5).
3 Press [USE].
• The “in use” target point mark ( ) appears to the left of the
channel number.
4 Enter a Target Point name (up to 9 characters).
5 Enter the north/south latitude.
<Menu 627 (DISPLAY UNIT 2 - POSITION): “dd°mm.mm' ”>
<Menu 627 (DISPLAY UNIT 2 - POSITION): “dd°mm'ss.s" ”>
6 Enter the east/west longitude.
<Menu 627 (DISPLAY UNIT 2 - POSITION): “dd°mm.mm' ”>
<Menu 627 (DISPLAY UNIT 2 - POSITION): “dd°mm'ss.s" ”>
MARK WAYPOINT
You can register up to 100 points with the location’s latitude,
longitude, altitude, time, name, and icon. You can edit names
and icons manually.
1 Press [MARK] (1s) to enter Mark Waypoint registration mode.
• When registering a Mark Waypoint, the following display appears
for approximately 10 seconds.
2 Press [EDIT] to enter Mark Waypoint editing mode.
3 Enter a Mark Waypoint name (up to 9 characters).
4 Select an APRS icon. Refer to the APRS explanation
regarding the available icons.
Note:
◆ Even when the Log function is OFF, you can register a Mark Waypoint.
◆ The MCP-6A can read Mark Waypoints.