REPEATER-2
■ Selecting a Tone Frequency
To select the tone frequency required to access your desired
repeater:
1 Turn the Tone function ON.
2 Press [F], [T.SEL].
• The current tone frequency appears on the display. The
default frequency is 88.5 Hz.
3 Rotate the Tuning control to select your desired
frequency.
• To exit the tone frequency selection, press [ESC].
4 Press any key other than the Tuning control and [ESC] to
set the selected frequency.
Note: If you have set up a Memory channel with a tone setting, simply
recall the Memory channel instead of setting up the tone frequency every
time.
No. Frequency
(Hz) No. Frequency
(Hz) No. Frequency
(Hz)
01 67.0 16 110.9 31 186.2
02 69.3 17 114.8 32 192.8
03 71.9 18 118.8 33 203.5
04 74.4 19 123.0 34 206.5
05 77.0 20 127.3 35 210.7
06 79.7 21 131.8 36 218.1
07 82.5 22 136.5 37 225.7
08 85.4 23 141.3 38 229.1
09 88.5 24 146.2 39 233.6
10 91.5 25 151.4 40 241.8
11 94.8 26 156.7 41 250.3
12 97.4 27 162.2 42 254.1
13 100.0 28 167.9
14 103.5 29 173.8
15 107.2 30 179.9
■ Automatic Repeater Offset
This function automatically selects an offset direction and
activates the Tone function, according to the frequency that
you have selected. To obtain an up-to-date band plan for
repeater offset direction, contact your national Amateur Radio
association.
1 Enter Menu mode and access Menu 401.
2 Set the ARO to ON.
3 Press [BAND SEL A] to select the A band.
4 Press [VFO] to select VFO mode.
5 Rotate the Tuning control to select your desired
frequency.
6 Press [PTT] to start a call.
• You will be transmitting on an offset frequency value
determined from your offset setting value and an offset
direction depending on your selected frequency. Refer to the
settings below for offset directions:
TM-D710GA
Under 145.100 MHz: No offset
(Simplex operation)
145.100 ~ 145.499 MHz: – 600 kHz offset
145.500 ~ 145.999 MHz: No offset
(Simplex operation)
146.000 ~ 146.399 MHz: + 600 kHz offset
146.400 ~ 146.599 MHz: No offset
(Simplex operation)
146.600 ~ 146.999 MHz: – 600 kHz offset
147.000 ~ 147.399 MHz: + 600 kHz offset
147.400 ~ 147.599 MHz: No offset
(Simplex operation)
147.600 ~ 147.999 MHz: – 600 kHz offset
148.000 MHz and higher: No offset
(Simplex operation)
Under 442.000 MHz: No offset
(Simplex operation)
442.000 ~ 444.999 MHz: + 5 MHz offset
445.000 ~ 446.999 MHz: No offset
(Simplex operation)
447.000 ~ 449.999 MHz: – 5 MHz offset
450.000 MHz and higher: No offset
(Simplex operation)
TM-D710GE
Under 145.600 MHz: No offset
(Simplex operation)
145.600 ~ 145.799 MHz: – 600 KHz offset
145.800 MHz and higher: No offset
(Simplex operation)