Remote control operations

36Registering setup codes for other components

Display

 

Display operation 1

5/∞

Display operation 2

 

1Press the display operation 1 key repeatedly until “ Menu” appears in the display.

Video1:

VCR

Menu

For step 1 through step @, make sure you start the next step within 8 seconds of completing the previous one. If more than 8 seconds elapses between any two steps, press the display operation keys so that the display appears.

2Press the display operation 2 [Menu] key repeatedly until “ 01.IR” appears in the display.

•The setup display appears.

>01.IR

>02.Surround Home Enter

3Press the 5/∞ keys to select “ 01.IR ”, then press the display operation 2 [Enter] key.

•The input selecting display appears.

>03.Video1 >04.Video2 Back Enter

Remote

• At this time all inputs become available regardless of any earlier

registration.

Control

 

4Press the 5/∞ keys to select the input that you want to register.

• Each time you press the 5/∞ key, the input changes as follows:

01: CD/DVD

02: MD/Tape

03: Video1

04: Video2

05: Video3

06: DVD

07: TV1

08: TV2

09:Cable 10: Phono

•Example: To select the source connected to the VIDEO1 jack, select “Video1”.

5Press the display operation 2 [Enter] key.

•The source selecting display appears.

•When you select “Phono” in step 4, go to step 0.

>05.VCR

>06.Cable Back Enter

6Press the 5/∞ keys to select the source you want to register.

•Each time you press the 5/∞ key, the input changes as follows:

01: CD

02:Tape

03:MD

04:CD-R

05:VCR

06:Cable

07:Satellit

08:TV

09:LD

10:DVD

11:DSS

12:No type 13: Delete

•Select “No type” when the desired source does not appear in the display.

•The selected input does not appear when you select “Delete”.

7Press the display operation 2 [Enter] key.

• The maker selecting display appears.

>Kenwood >Admidral Back Enter

8Press the 5/∞ keys to select the maker you want to register.

•Press the 5/∞ keys until the desired maker appears in the display. When the desired maker does not appear, select “Nothing”.

9Press the display operation 2 [Enter] key.

• The setup code selecting display appears.

>01:0056

>02:Nothing Back Enter

0Press the 5/∞ keys to select the setup code.

!Press the AV POWER key, and check to see that the component you want to control turns on.

If the component does not react, and there is more than one setup code, enter another setup code and try again.

•If the component is already on, pressing the AV POWER key will turn it off.