Kenwood VR-510 Executing an automatic operation, 5Press the MACRO key, 1Press the MACRO key, Remote control operations, 4Press the keys to be operated in order

3Press the MUSIC, MOVIE, or TV key to select the macro location. (MACRO1, 2, and 3 respectively)

•You can store up to 3 different macros, one at each key:

MUSIC = “MACRO 1”, MOVIE = “MACRO 2”, TV = “MACRO 3”

•Pressing a key other than MUSIC, MOVIE, or TV cancels the macro program mode.

MACRO1

Select MACRO

When MUSIC is pressed.

4Press the keys to be operated in order.

EXAMPLE:

This example shows you how to create a macro that; turns on the TV, sets the TV to the appropriate input, selects the receiver's input selector to LD, and turns on the LD player. All you have to do is insert the laser disc!

1Press the TV key, then press the AV POWER key to turn on the TV.

2Press the F. SHIFT key, then press the “3” (INPUT SEL.) key to set the TV to the appropriate video input.

3Press the MOVIE key to select the LD player registered at VIDEO 2.

4Press the AV POWER key to turn on the LD player.

•Make sure you start the next operation within 8 seconds of complet- ing the previous one. If more than 8 seconds elapses between any two steps, exit the macro programming mode.

•In order to allow verification of the remote control mode, the name of the selected input appears in the receiver's display when the MUSIC, MOVIE, or TV key is pressed. When the MUSIC or MOVIE key is pressed the receiver's input also changes.

5Press the MACRO key.

•The macro is stored at the locations specified in step 3. If another macro was previously stored at the same location, it is erased.

Repeat steps 1 through 5 to program up to 3 macros.

This completes the macro programming procedure.

Remote control operations

Executing an automatic operation

MACRO

MUSIC, MOVIE,

+ +

– –

During operation, make sure you start the next step within 8 seconds of completing the previous one. If more than 8 seconds elapses between any two steps, press the display operation key so that the display appears.

1Press the MACRO key.

• “MACRO EXE” appears in the display.

MACRO EXE

Select MACRO

2Press the MUSIC, MOVIE, or TV key to execute the corresponding macro play.

•"MACRO EXE" appears in the display and the pre-programmed macro is performed:

MUSIC = “MACRO 1”, MOVIE = “MACRO 2”, TV = “MACRO 3”

•Some devices take up to 1 second to power on. The macro function has an automatic delay after any power function output.

•Pressing a key other than MUSIC, MOVIE, or TV cancels the macro program mode.

MACRO1 EXE

Select MACRO

When MUSIC is pressed.Control Remote