@Press the display operation 2 [Enter] key.

• The display returns to the setup display.

>01.IR

>02.Surround Home Enter

Remote control operations

Operating other components

37

This operation lets you operate the registered components. KENWOOD audio components with system control turn on and off automatically with the receiver via the system control connections.

Repeat steps 3 to @ to register additional components until all components have been registered.

To return to the initial display, press display operation 1 [HOME] key repeatedly until “ Menu” appears in the display.

Video1:

VCR

Menu

•Once registered, the display on the receiver shows the component type instead of the default input name.

Example: if you register a VCR at the VIDEO 1 jacks, “Video1” and “VCR” appear in the display.

•Any VIDEO or TV (TV1, TV2, CABLE) inputs that have not been programmed with a setup code or Non-IR code are deleted from the cyclic list.

When you make a mistake

Press the display operation 1 [Back] key repeatedly until the display you want to re-operate appears.

Note

Although each setup code is designed to work with a number of different models, certain codes may not work with some models. (Also, certain codes may only operate some of the functions available on a given model.)

SHIFT

MUSIC, MOVIE,

AV POWER I /

TV

 

+

+

–

–

During operation, make sure you start the next step within 8 seconds of completing the previous one. If more than 8 seconds elapse between any two steps, press the display operation key so that the display appears.

1Use the MUSIC, MOVIE, or TV key to select the component you desire.

•Pressing the MUSIC or MOVIE key also changes the input selector on the receiver. If you do not want to change the current input, press the SHIFT key before step 1.

MUSIC key

MOVIE key

TV key

 

 

1

CD/DVD

 

 

1

Video1

 

 

1

TV1

 

2

TAPE or MD

 

2

Video2

 

2

TV2

 

3

Tuner

 

3

Video3

 

 

 

3

CABLE

 

 

 

 

 

 

4

PHONO

 

4

DVD 6CH

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

5

AV AUX

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Video1:

VCR

Menu

Select source

 

 

 

• You cannot select the source that is not registered.

Control

2Press the AV POWER

 

key.

 

 

 

 

• The selected component turns on or off.

Remote

3Press the operation keys you desire.

 

• See “Remote control operation of other components” at the end of this manual for a list of keys available with each component. e

The remote control mode remains in the set at the component selected in step 1 mode until you select another component.

Note

Be sure to point the remote control at the remote sensor on the receiver when you want to operate KENWOOD components connected by system control cords. Otherwise, point the remote control at the component you want to operate.