Specifications
AUDIO sectionRated power output during STEREO operation
110 watts per channel minimum RMS, both channels driven, at 8 Ω from 20 Hz to 20 kHz with no more than 0.7% total harmonic distortion. (FTC)
Effective power output during SURROUND operation FRONT
.............................................................................. | 110 W + 110 W | |
CENTER | ||
............................................................................................. | 110 W | |
SURROUND | ||
driven) .................................................................. | 110 W + 110 W | |
Total harmonic distortion ......................... | 0.045% (1 kHz, 55W, 8 Ω) | |
Frequency response |
|
|
CD ............................................. | 10 Hz ~ 60 kHz, +0 dB, | |
Signal to noise ratio (IHF’66) |
|
|
PHONO (MM) ........................................................................ | 75 dB | |
CD ......................................................................................... | 92 dB | |
Input sensitivity / ............................................................impedance | 4 mV / 27 kΩ | |
PHONO (MM) |
| |
CD ......................................................................... | 300 mV / 47 kΩ | |
MONITOR IN ........................................................ | 300 mV / 47 kΩ | |
DVD/6CH INPUT .................................................. | 300 mV / 47 kΩ | |
Output level / impedance.............................................................. | 300 mV / 1 kΩ | |
TAPE REC |
| |
MONITOR OUT ...................................................... | 300 mV / 1 kΩ | |
PRE OUT (FRONT, CENTER, SURROUND) | ............. 1 V / 500 Ω | |
PRE OUT (SUBWOOFER) ....................................... | 1.8 V / 500 Ω | |
Tone control |
|
|
BASS ................................................................ | ±10 dB (at 70 Hz) | |
TREBLE .......................................................... | ±10 dB (at 10 kHz) |
Caution : Read this page carefully to ensure safe operation.
VIDEO section |
|
| 51 | |
VIDEO inputs / outputs | ............................................ | 1 | ||
VIDEO | (composite) |
|
| |
S VIDEO | (luminance signal) ................................ | 1 | ||
| (chrominance signal) ..................... | 0.286 | ||
COMPONENT VIDEO (luminance signal) | ............. 1 | |||
| (CB/CR - signal) ....... | +/– 0.324 | ||
FM tuner section |
|
|
| |
Tuning frequency range ................................... |
| 87.5 MHz ~ 108 MHz | ||
Usable sensitivity (MONO) |
|
|
| |
................ | 1.3 µV (75 Ω)/ 13.2 dBf (75 kHz DEV., SINAD 30 dB) | |||
50dB quieting sensitivity |
| 28 µV (75 Ω)/ 40.2 dBf | ||
STEREO ................................................... |
| |||
Total harmonic distortion (1 kHz) |
|
| ||
MONO ............................................................ |
|
| 0.5% (65 dBf input) | |
STEREO ........................................................ |
|
| 0.7% (65 dBf input) | |
Signal to noise ratio (1 kHz, 75 kHz DEV.) |
|
| ||
MONO .......................................................... |
|
| 75 dB (65 dBf input) | |
STEREO ...................................................... |
|
| 68 dB (65 dBf input) | |
Stereo separation (1 kHz) .......................................................... |
| 40 dB | ||
Selectivity (±400 kHz) ................................................................. |
| 70 dB | ||
Frequency response ................. | (30 Hz ~ 15kHz), +0.5 dB, | |||
AM tuner section |
|
|
| |
Tuning frequency range |
|
|
| |
10 kHz step ................................................. |
| 530 kHz ~ 1,700 kHz | ||
Usable sensitivity ................................................. |
| 16 µV / (600 µV/m) | ||
Signal to noise ratio (30% mod. 1 mV input) ........................... | 50 dB |
Sampling frequency | ...................... 32 kHz, 44.1 kHz, 48 kHz, 96kHz |
Input level / impedance / wave length | |
Optical ........................... | |
Coaxial ................................................................. | 0.5 |
Power consumption | .................................................................... 2.6 A |
AC outlet |
|
SWITCHED ....................................... | (total 150 W, 1.25 A max.) |
Dimensions ..................................................... | W : 440 mm |
| H : 144 mm |
| D : 399 |
Weight (Net) .............................................................. | 8.75 kg (19.3 lb) |
Notes
1.KENWOOD follows a policy of continuous advancements in development. For this reason specifications may be changed without notice.
2.The full performance may not be exhibited in an extremely cold location (under a
Additional Information