How Do I Adjust the LCD Display?

Adjusting the brightness of receiver

When the ambient light is low, for example in the night, the brightness of the receiver’s display can be dimmed and LED indicators (THX, DTS, D.R.I.V.E., DOLBY DIGITAL, MPEG, HDCD and 2-way communication indicator) can be disabled.

•Press the F.SHIFT =SOUND (DIMMER)* buttons. Each press of the SOUND (DIMMER) button switches the brightness as shown below.

1

Display/bright

Indicators/enabled

2

Display/dim

Indicators/enabled

3

Display/dim

Indicators/disabled

Selecting the display mode of receiver front panel

•Press and hold the LISTEN MODE (DISPLAY) button on the receiver for more than 2 seconds.

The displayed information is switched every 2 seconds of holding the button.

A: Connected Device

Input Mode

DVD

AUTO

B: Input Terminal

Connected Device

VIDEO3 :

DVD

C: Listen Mode

DOLBY DIGITAL

"Input Mode" is displayed only when a selector with digital input is se- lected.

When the selected input is PHONO or TUNER, the connected device and listen mode are displayed alternately. (Switching between A and C). "Input mode" and "Connected Device" do not be displayed.

The TUNER display shows the frequency.

*When an operation is described as [F.SHIFT = SOUND (DIMMER) button], for example, press the F.SHIFT button and press the next button (the SOUND (DIMMER) button in this case) within 8 seconds.

Receiver Using

51