Using Receiver

Using Remote Control Unit in Multiple Zones

Operation using the SYS.POWER button on Remote Control unit To perform the Multi-Zone operation, switch the Multi Zone function On in advance (see page 55).

1.When the receiver is OFF (STANDBY mode):

•To output the video and audio to Zone A, set the Zone setting of the remote to Zone A then press the SYS.POWER button on the remote.

•To output the video and audio to Zone B, set the Zone setting of the remote to Zone B then press the SYS.POWER button on the remote.

2.When the video and audio are output to Zone A only:

•To turn the receiver OFF (STANDBY mode), set the Zone setting of the remote to Zone A then press the SYS.POWER button on the remote.

•To output the video and audio to Zone B, set the Zone setting of the remote to Zone B then press the SYS.POWER button on the remote.

3.When the video and audio are output to Zone B only:

•To turn the receiver OFF (STANDBY mode), set the Zone setting of the remote to Zone B then press the SYS.POWER button on the remote.

•To output the video and audio to Zone A, set the Zone setting of the remote to Zone A then press the SYS.POWER button on the remote.

4.When the video and audio are output to both Zone A and Zone B:

•To turn the receiver OFF (STANDBY mode), set the Zone setting of the remote to Zone A then press the SYS.POWER button on the remote.

•To defeat the video and audio outputs to Zone B, set the Zone setting of the remote to Zone B then press the SYS.POWER button on the remote.

The receiver can also be turned OFF (STANDBY mode) by pressing the POWER button on the receiver.

56