Receiver/Tuner
Ican’t receive a radio station Check that:
•The appropriate antenna is connected. See Chapter One of the Con- nections and Setup Guide.
•The broadcast band is correct. See “Radio Tuning” on page 44 of this manual.
•The tuner is set to the correct frequency. See “Radio Tuning” on page 44 of this manual.
I’m getting a lot of static/interference
•Check whether the receiver or antenna is too close to a TV or other electrical appliance.
•Adjust the antenna for best reception.
•If you live in an area with weak FM signals, consider a rooftop FM antenna (available at any home electronics store).
When I press a button to tune to a preset station, the receiver does not respond
Check whether:
•The receiver has been unplugged for more than three days. If it has, your settings were cleared from the receiver’s memory. See “My re- ceiver won’t turn on and the STANDBY indicator is flashing” on page 76 of this manual.
•The Tuner input is selected. See “Radio Tuning” on page 44 of this manual.
Troubleshooting
78