Kenwood XD-500, XD-700, XD-750 Receiver, Cassette deck unit, CD player unit, 1ON/STANDBY, 8DISPLAY

Controls and indicators

XD-750/700/550/500 (En)

Receiver

1ON/STANDBY (	) key		^	When power is STANDBY:	Switches the demonstration on and
Power ON/OFF switching is executed.					off.	∞
2RESET key			Y !ENTER key				p
Press to reset the microcomputer built in the system.				Used for time setting, timer setting, etc.
3MIC MIX. knob			o @MODE key			tQ
At the time of mic mixing , this knob controls the volumes of the				When power is ON:	This key switches the function of the
microphones.					MULTI CONTROL/VOLUME knob.
4MIC 1, MIC 2 terminal			o		The items which can be selected differ
					according to the status at that time.
For connection of a microphone (optional).
				When power is STANDBY: This key is used in the OTT timer set-
5HIT MASTER key			o
					ting.
Used in karaoke singing, etc.				#Equalizer operation keys		yu
6BEST HITS key			&r
				The equalizer effect is switched ON/OFF and the type of equalizer
When power is ON:		Records the first tracks of all of the CDs		effect is selected.
		stored in the unit.		$MULTI CONTROL/VOLUME knob			^
When power is STANDBY: Switches the auto power-save mode on
				Normally this is used for volume adjustment. Depending on the
		and off.
				purpose, the function can be switched with the MODE key.
7EX. BASS (Extra bass) key			&W
				%PHONES terminal			&
When power is ON:		Switches the extra bass play on and		For connection of a headphone (optional).
		off.
				^INPUT key			^
When power is STANDBY:		Used in the timer setting operation.
8DISPLAY			@	Press to select the input source. When TAPE or CD is selected,
				playback starts automatically provided that a tape or disc has already
9SRS 3D key/Indicator (XD-750/XD-700)			iE	been loaded.

1 1

Preparation section

When power is ON:	Switches the SRS 3D play on and off.
When power is STANDBY:	Used in the timer setting operation.

SOURCE DIRECT key/Indicator (XD-550, XD-500)

	iE
When power is ON:	Press to turn the Source Direct play on
	and off.
When power is STANDBY:	Used in timer setting operations.

0DISP. /DEMO key	y
When power is ON:	Switches the displayed information.
	Switches the demonstration on and
	off.

&Tuner operation keys	¢
AUTO key
When power is ON:	Switches the tuning mode.
When power is STANDBY:	Used in the clock adjustment.

TUNING keys

Press to select a radio station.

BAND key

Press to switch the receiving band.

Cassette deck unit

*A deck cassette holder		£DUBBING key	»
Press the area marked PUSH OPEN to load or eject a tape.		The contents of the tape of the A deck are copied to the tape of the
(O.T.E. key	â	B deck.
When this key is pressed during CD playback, only the title being		¢B deck cassette holder
played at that time will be recorded on tape. When this key is pressed		Press the area marked PUSH OPEN to load or eject a tape.
during stop, the CD selected at that time will be recorded on tape		∞ Cassette deck operation keys
from the first title onward.
		Play (2 3) keys
)DOLBY NR key	Á	Stop (7) key
Dolby noise reduction ON/OFF switching is executed.		Fast forward and rewind (1 Á) keys
ÁREV. MODE key	Á ¤A/B key		)¥
The reverse mode of the deck (both sides, repeated, one side) is		Press to select the deck to be operated. Used as the beat cancel key
switched.		during recording of AM broadcasting.
ªREC/ARM key	¦

Press to start recording. Pressing the key during recording stops it after leaving a non-recorded space (blank) of about 4 seconds.

Application section

CD player unit

¦DISC SELECTOR key

The disc for playback (or recording) is selected.

¥TIME DISP. (Time display) key

Press to switch the CD time display information.

»Disc tray

Three discs can be stored.

¼OPEN/CLOSE (0) key

The disc tray is opened and closed.

( ÚDISC SKIP key (

The disc for playback (or recording) is selected. This is also used for

*insertion of a CD to the inside of the disc tray.

	ÛCD operation keys	*
*	Play/pause (6) key
	Stop (7) key
*	Skip (4 ¢) keys

Knowledge sections