Kenwood XD-500, XD-700 Searching for the desired music program Dpss, During play in direction

Let's put out some sound 2 3

XD-750/700/550/500 (En)

Searching for the desired music program (DPSS)

The DPSS (Direct Program Search System) is capable of detecting non-recorded spaces of more than 4 seconds as “blanks between programs” and, based on this information, can return to the beginning of the music program being played or the beginning of a desired program by skipping up to 16 other programs.

During play in direction 3

To play the next program				: Press once.
To play the 4th program
after the current program				: Press 4 times.
	2	7	3
1					Á￿

To return to the beginning

of the current program : Press once. To play the 4th program

before the current program : Press 5 times.

During play in direction 2

To play the next program			: Press once.
To play the 4th program
after the current program			: Press 4 times.
	2	7	3
1				Á￿

To return to the beginning

of the current program : Press once. To play the 4th program

before the current program : Press 5 times.

Preparation section

The DPSS may not function normally with the following kinds of tape.

Notes	÷ Tapes containing several no-sound intervals of more than 4 seconds, such as conversation and talk tapes.
	÷ Tapes containing pianissimo sections, such as classical music tape.

÷Tapes in which large noise is recorded in blanks between programs.

÷Tapes containing blanks between programs that are shorter than 4 seconds.

÷Tapes recorded at low level.

÷Tapes recorded by cross-fade recording (in which the beginning of next program is overlapped on the end of previous program).

Basic section

Application section

Knowledge sections