24
Relay play
When tapes are set in the decks A and B and the reverse mode is set to “[” (play of both sides), play of the second deck will be started automatically after play of the first deck has been com- pleted. Tape play will be repeated alternately.
ÖRelay play is not possible in the reverse modes “Ó” and “Ò”.
section | A tip for use of the tape counter | |
The tape counter is set to “0000” when a cassette tape is loaded. | ||
Preparation | ||
By writing down the counter reading in case you want to inter- | ||
| ||
| rupt recording (playback) in the middle of the tape, the memo | |
| will be helpful as a reference for locating the same position when | |
| continuing the recording (playback) the next time. The tape coun- | |
| ter figure decrements during recording or playback of the back | |
| side (while the 2 tape transport indicator is lit). | |
| To set the tape counter to “0000”, open the cassette holder once. | |
| Then the counter will be reset. | |
|
|
Basic section
Application section
Let's put out some sound
A | A |
TAPE B 0 0 0 0 
NR
Knowledge sections
