Effective Sound Adjustment 53
DOLBY 3 STEREO adjustment
This mode improves the positioning of the acoustic image of words, etc., by applying directivity enhancer processing and using an additional center speaker when a video software program recorded with ordinary
1Activate the DOLBY 3 STEREO mode.
1Perform the same operations as step 1 and 2 of the
procedure for “Setting using the remote control unit” of “DOLBY PRO LOGIC surround adjustment”. Q
2Select the DOLBY 3 STEREO mode.
1 | 2 SET |
(Go to next step within 15 sec.)
3Select the center speaker mode.
1 | 2 ENTER |
2Adjust the volume balance.
1Generate the test tone.
TEST TONE
2Adjust the center speaker volume with the main speaker volume.
CENTER | To increase |
|
To decrease
3Stop the test tone.
TEST TONE
If you are operating the main unit, press the LISTEN MODE key then select by turning the MULTI CONTROL jog dial in place of press- ing the “@#” key of the remote control unit.
Scrolled display (DOLBY 3 STEREO)
D
OLB Y 3 s T 
The center mode display scrolls.
N
ORM AL
DOLBY PRO LOGIC
DOLBY 3 STEREO
STEREO
DSP
NORMAL | When the center speaker is |
| speaker. |
WIDEBAND | When the center speaker is medium- or |
| |
RETURN | Returns to step 2. |
ÖIf you cannot tell whether your center speaker is compact or medium- sized, try two modes and select according to your liking.
ÖBe sure to adjust from your listening position.
ÖThe speaker volumes are to be adjusted while listening to the test tone.
ÖThe test tone which is heard like noise moves between speakers at an interval of 1.5 sec.
TEST L
The display and test tone output speaker are switched auto- matically.
TEST L (Left)
TEST C (Center)C-CH + 5
TEST R (Right)
ÖThe center level can be adjusted in steps of 1 dB.
ÖThe volume levels can be adjusted in the range from
ÖThe center level value is memorized as a common setting with DOLBY PRO LOGIC surround.
Application section
DOLBY 3 STEREO play
| Before playing a video (or LD) software program carrying the |
| mark, be sure to complete the “DOLBY 3 | |||
| STEREO adjustment”. |
| Scrolled display (DOLBY 3 STEREO) | |||
1Activate the DOLBY 3 STEREO mode. |
| |||||
|
|
| ||||
| DOLB Y 3 s T |
| ||||
|
|
|
|
|
| |
| Press the DOLBY 3 STEREO key of the remote control |
|
|
|
|
|
|
|
|
|
|
| |
| unit. |
|
|
| Scrolled display (Center mode display) | |
|
|
|
|
| ||
2Play a video software program. |
| |||||
| NORM AL |
| ||||
3Adjust the volume. |
|
|
| |||
To cancel DOLBY 3 STEREO play | ||||||
Use the VOLUME keys of the remote control unit.
Press the STEREO key of the remote control unit.
