Kicker SX1250.1 Noise OFf, C...1, 2, 3...etc, Sick BAY, ESC key to return to the Sick ESC, Press

Models: SX650.1 SX1250.1

1 20
Download 20 pages 26.79 Kb
Page 10
Image 10

SYSTEM MENU - This menu item contains many diagnostic tools and first time setup options. Use the UP and DOWN arrow keys to scroll through the options and press ENT to select. Press the ESC key to return to the SYSTEM menu.

7a.) CURRENT shows amplifiers current status or fault code. The 6 possible codes are:

normal - No problem, normal operation. thermal - Thermal cutoff protection engaged.

SICK BAY - cont

7c.) PINK NOISE is a built in pink noise generator to test operation of the amplifier

8.) Amp Name - Here you can assign a unique name to your KICKER SX amplifier. This name will replace the model name in the DEFAULT screen. If you change your mind and do not want to change the name, press and hold the HOME key for 1.5 seconds BEFORE making any changes.

Operation

1.) Volt Now - Displays the current voltage at the amplifiers +12 volt terminal.

2.) Volt Min - Displays the lowest voltage seen at the amplifiers +12 volt terminal since being installed.

3.) Volt Max - Displays the highest voltage at the amplifiers +12 volt terminal since being installed.

4.) Temp Now - Displays the current temperature of the amplifier.

short - Short circuit protection engaged. Hi-Volt- High voltage protection engaged. FUSE - Faulty or blown power fuse.

SERVICE - Amp requires service by KICKER.

When you are done viewing the current status press the

ESC key to return to the SICK ESC

HOME

ENT

BAY menu.

7b. )HISTORY logs the last 5 fault codes and how

Use the UP and DOWN keys to select NOISE ON or

NOISE OFf.

When the PINK NOISE is ON the LEFT and RIGHT indicators in the ISIS VFD will blink on and off.

ESC HOME ENT

AMP1 AMP2

LOCK LEFT SYS RIGHT MUTE GAIN EQ LPF HPF PHASE KOMP

noise on

MEM-1 MEM-2 MEM-3 MEM-4

The ESC and ENT keys move the cursor left or right to select which character to change.

Use the UP and DOWN keys to change the character displayed

ESC HOME ENT

Operation

5.) Temp Max - Displays the highest temperature the amplifier has reached since being installed.

long ago they happened when compared to the RUN TIME log.

Use the UP and DOWN

When you are done using the PINK NOISE generator press the ESC key to return to the SICK BAY menu.

ESC HOME ENT

(A, B, C...1, 2, 3...etc)

ESC HOME ENT

PRESS &

6.) Run Time - Displays the total time the amplifier has been powered up since installation in 1/10th of an hour increments

7.) Sick Bay - Contains several diagnostic tools. Once in this menu you use the UP and DOWN keys to scroll through CURRENT, HISTORY and PINK NOISE options. Press the ENT

keys to select the HISTORY log entry you want to view.

Press and hold the ENT key to view the time it happened.

When you are done viewing

ESC HOME ENT

ESC HOME ENT

NOTE...

If you exit the SICK BAY menu with the PINK NOISE generator still on, the LEFT and RIGHT ISIS VFD indicators will remain blinking as a reminder.

When you are finished press and hold the HOME key for 1.5 seconds to save your new amplifier name.

HOLD

ESC HOME ENT

key to select.

ESC HOME ENT

the history press the ESC key.

ESC HOME ENT

18

SX .1 Series Amplifiers

SX .1 Series Amplifiers

19

Page 10
Image 10
Kicker SX1250.1, SX650.1 manual Noise OFf, C...1, 2, 3...etc, Sick BAY, ESC key to return to the Sick ESC, Press

SX650.1, SX1250.1 specifications

Kicker is known for its dedication to delivering top-tier audio performance, and the Kicker SX1250.1 and SX650.1 amplifiers stand out in the realm of car audio. Packed with robust features and innovative technologies, these amplifiers cater to both novice and expert audio enthusiasts.

Starting with the Kicker SX1250.1, this powerhouse monoblock amplifier is specifically designed to deliver a staggering 1,250 watts RMS at 1 ohm. With the ability to push your subwoofers to their limits, it provides deep, impactful bass that enhances your music experience. The SX1250.1 features a variable low-pass crossover, allowing users to fine-tune the cutoff frequency to perfectly match their subwoofers. Additionally, it is equipped with a built-in subsonic filter, which helps to eliminate unwanted lower frequencies that can lead to distortion.

The SX1250.1 utilizes advanced technology such as the Kicker's exclusive FIT (Fail-Safe Integration Technology), ensuring maximum compatibility with a variety of vehicle audio systems. This technology also aids in minimizing voltage loss and maximizing sound quality, resulting in an impressive audio output. The amplifier's thermal and short-circuit protection circuitry guarantees reliable performance, preventing overheating and ensuring longevity.

On the other hand, the Kicker SX650.1 is another exemplary model that emphasizes versatility and efficiency. This mono amplifier delivers 650 watts RMS at 1 ohm, making it suitable for smaller systems where space and power consumption are of concern. The SX650.1 also includes a variable low-pass crossover and bass boost feature, allowing users to customize their audio settings to suit their listening preferences.

Like its larger counterpart, the SX650.1 is built with FIT technology, ensuring a secure connection to your vehicle's audio system. Its compact design makes it easy to install in tight spaces without compromising on performance. Kicker has also included an integrated heatsink design to enhance cooling efficiency, ensuring optimal performance even during prolonged use.

Both the SX1250.1 and SX650.1 amplifiers boast a stylish and sleek appearance, with a distinctive Kicker logo that complements any audio setup. Whether you are a bass enthusiast seeking high-performance output or a casual listener looking for quality sound, the Kicker SX amplifiers deliver exceptional audio experience that is hard to match, making them a wise investment for any car audio lover.