Kicker manual Kompressor, Performance, Model SX650.1 SX1250.1 RMS Power, Dynamic Power

Specifications

34

Kompressor

Here is a brief explanation of each KOMPRESSOR setting.

Contour - This preset applies expansion below the threshold point to provide a fuller sound at lower volume levels. Effect decreases at higher volume levels. Nice effect for someone wanting a fuller sound at low to moderate listening levels.

ATTACK - This preset applies expansion above the threshold point to provide a nice quick punch or attack to the music. Effect increase with higher volume levels. Like music with a quick and punchy sound? Give this one a try.

Red-line- Provides a quick clamp to dynamic peaks while still allowing a full sound to come through. Effect increases at higher volume levels. Like to play it loud but want to protect your speakers? Want low level details to come through over road noise? Want a more even volume level to your music? All can be achieved with this preset.

OFF - Pretty much says it all. This turns the KOMPRESSOR off. This is the factory default setting.

After selecting your KOMPRESSOR setting you can adjust its effect using the KOMPRESSOR ADJUSTMENT (KOMP ADJ.) setting located in the SYSTEM menu. There you can change the threshold point for each of these settings to customize the KOMPRESSOR effect to fit your speakers, car or personal tastes.

The possibilities are almost endless! Tweak away!

SX .1 Series Amplifiers

Performance

	Model	SX650.1	SX1250.1
RMS Power
In Watts, All Channels Driven
@ 13.8V, 4Ω Mono, 1.5% THD		325 x 1	na
@ 13.8V, 2Ω Mono, 1.5% THD		650 x 1	625 x 1
@ 13.8V, 1Ω Mono, 1.5% THD		na	1250 x 1
Dynamic Power
In Watts, All Channels Driven
@ 14.4V, 4Ω Mono, 1.5% THD		325 x 1	na
@ 14.4V, 2Ω Mono, 1.5% THD		650 x 1	625 x 1
@ 14.4V, 1Ω Mono, 1.5% THD		na	1250 x 1
Length With EndKaps		16”	22.50”
		(40.64cm)	(57.15cm)
Fusing		30A x 2	150A x 1 external
Recommended Power & Ground Wire		4 GA	2 GA

SX .1 Series Amplifiers

Specifications

35