Kingston Technology KNS800/WG, KNS500/WG manual C. Certification, CE Notice, Tick Certification

20 ___Appendix E Warranties and Notices

F.C.C. Certification

This device has been tested and found to comply with limits for Class A digital device, pursuant to Part 15 of the FCC Rules. Operation is subject to the following two conditions:

(1)This device may not cause harmful interference, and

(2)This device must accept any interference received; including interference that may cause undesired operation.

CE Notice

The official CE symbol indicates compliance of this Kingston Technology product to the EMC directive of the European Community. The CE symbol indicates that this Kingston product meets or exceeds the following standards:

‰EN50081-1“Electromagnetic Compatibility-generic emissions standard”

EN55022: “Limits and methods of measurement of radio interference characteristics.”

‰EN50082-1“Electromagnetic Compatibility-generic immunity standard”

IEC 801-2: IEC 801-3: IEC 801-4:

“Electrostatic discharge requirements” “Radiated immunity requirements” “Electrical fast transient requirements”

‰ EN60950 “Low Voltage Directive (LVD)”

‰Declaration of CE Conformity in accordance with the above standards has been made and is on file at Kingston Technology.

C-Tick Certification

‰AS/NZS 3548 “Information Technology Equipment”

‰Declaration of C-Tick Conformity in accordance with the above standards has been made and is on file at Kingston Technology.

N1298

Kingston Technology Company KNS800/WG User’s Guide - Rev. B01