19 . If side panels are not used, go to Step 20. if
Top view
is 25” (63.5 cm) or more, side panels
\
\ rear wall
Assemble the bottom trim of 15. the top grille onto the trim at the top of the cabinet.
top grille | mounting | brackets |
|
h | / | \ | I I |
I I |
Use the four sheet metal 16. screws to attach top grille to the mounting brackets on top of the cabinet.
top grille decor pan lel
17 . Remove screws and side trim from one side of the decorative panel. Insert your panel. Reattach side trim and screws.
18 . Slide decorative oanel down to reattach to top grille. ’
can be installed inside the side trim or attached to the outside of the side trim.
Top view
wall | |
| |
| d |
| - side panel |
l Inside side trim piece: Slide front edge of routed side panel into trim piece. Nail rear edge of panel to support board.
Top view
t
I
(62 cm) max.
l Outside side trim piece: Drill 6 equally spaced holes into side trim piece. Do Not drill into side of appliance. Attach a support board to trim piece. Nail front and rear edges of side panel to support boards. Cover front support board with a matching panel piece.
support board
- side panel
side trim
door
If
Then attach wood support to trim. Attach side panel to wood support and support nailer. Cover wood support with a matching panel piece.)
bottom __
Open appliance doors and 20 . remove protective film from door frame. Recheck water connections at bottom of refrigerator for leaks.
Attach bottom grille to cabinet with two screws. Install shelves and bins in refrigerator and freezer compartments.
21 Set refrigerator and freezer
. compartment controls to the midpoint between “COLD” and “COLDEST.” Check that the compressor is operating properly and that all five lights are working.
Part No. | 2003757 | DUtcHmenAid” |
|
| |
0 1996 | KitchenAid. | APPLIA |
|
| |
@ KitchenAid. Registered | trademark |
|
|
| |
of KitchenAid. | Prepared by KitchenAid, | St. Joseph, Michigan | 49085 | Printed in U.S.A. | |
