9.Install the two
2 screws
align top edges
10.Tighten the two side screws reinstalled in Step 8.
11.Reinstall and tighten the three remaining side screws.
Custom panel dimensions
IMPORTANT: You need to know what control panel is on your dishwasher before you order your custom door panel.
For dishwashers with the control panel shown below:
(models KUDP02FSPA, KUDS02FSPA, KUDU02FSPA)
(Your model may vary slightly from picture above.)
Custom door panel dimensions are:
|
3/4" (19.1 mm)
*This dimension is for 4" (10.2 cm) toe kick. If the installation needs a higher toe kick, adjust the height of the wood panel accordingly. Not recommended for toe kicks greater than 6" (15.2 cm).
Follow directions under Option #1 of “Install custom panel” section.
For dishwashers with the control panel shown below:
(Models KUDI02FR, KUDP02FR, KUDS02FR, KUDU02FR)
(Your model may vary slightly from picture above.)
Custom door panel dimensions are:
| *30" (76.2 cm) |
3/4" (19.1 mm)
*This dimension is for 4" (10.2 cm) toe kick. If the installation needs a higher toe kick, adjust the height of the wood panel accordingly. Not recommended for toe kicks greater than 6" (15.2 cm).
Follow directions in Option #2 of “Install custom panel” section.
For dishwashers with the control panel shown below:
(Models KUDC02IR, KUDI02IR, KUDP02IR, KUDS02IR)
(Your model may vary slightly from picture above.)
Custom door panel dimensions are:
|
| |
|
|
|
3/4" (19.1
mm)
1/8" (3.2 mm)
1/8" (3.2 mm)
*This dimension is for 4" (10.2 cm) toe kick. If the installation needs a higher toe kick, adjust the height of the wood panel accordingly. Not recommended for toe kicks greater than 6" (15.2 cm).
Follow directions in Option #3 of “Install custom panel” section.
12