KitchenAid Electric Built-In Microwave/Oven Combination Installation Instructions

INSTALLATION INSTRUCTIONS

Prepare Built-In Microwave/Oven

Combination

1.Decide on the final location for the oven. Avoid drilling into or severing existing wiring during installation.

WARNING

Excessive Weight Hazard

Use two or more people to move and install oven. Failure to do so can result in back or other injury.

2.To avoid floor damage, set the oven onto cardboard prior to installation. Do not use handle or any portion of the front frame for lifting.

3.Remove the shipping materials and tape from the oven.

4.Remove the hardware package from inside the bag containing literature.

5.Remove and set aside racks and other parts from inside the oven.

6.Move oven and cardboard close to the oven’s final location.

Remove Oven Door

IMPORTANT: Use both hands to remove oven door(s).

1.Open the oven door.

2.Locate the oven door latches in both corners of the oven door, and rotate the latches forward to the unlocked position.

A B

A. Oven door latch in locked	B. Oven door latch in unlocked
position	position

3.Grasp the edges of the oven door with both hands and close the oven door until it will no longer close. Lift and pull oven door toward you and remove. Set the oven door(s) aside on a covered work surface.

Make Electrical Connection

WARNING

Electrical Shock Hazard

Disconnect power before servicing.

Use 8 gauge solid copper wire.

Electrically ground oven.

Failure to follow these instructions can result in death, fire, or electrical shock.

This oven is manufactured with a neutral (white) power supply wire and a cabinet-connected green (or bare) ground wire twisted together.

1.Disconnect power.

2.Feed the flexible conduit from the oven through the opening in the cabinet.

3.Remove junction box cover, if it is present.

4.Install a UL listed or CSA approved conduit connector to the junction box.

A

A. UL listed or CSA approved conduit connector

5.Route the flexible conduit from the oven to the junction box through a UL listed or CSA approved conduit connector.

6.Tighten screws on conduit connector.

7.See “Electrical Connection Options Chart” to complete installation for your type of electrical connection.

Electrical Connection Options Chart

If your home has:	Go to section:
4-wire	4-wire Cable from Home
	Power Supply
	½"
	(1.3 cm)
3-wire	3-wire Cable from Home
	Power Supply

½"

(1.3 cm)

5