drain
washer locknut
9. Install the 1" (2.5 cm) drain fitting in the ice bin and the
10. Ice bin drain and sink drain fittings to be connected to drain system in accordance with local code requirements.
apply clear
silicone
11. Apply a bead of all weather clear silicone on the under side of the back and two sides of the top lip.
12. Carefully position the Bar Cart into the cut out. Immediately remove any excess silicone.
plastic
hose
filter
13. Connect the plastic hose from the water filter to the faucet connection and tighten securely.
plastic
hose
inlet
connector
filter
14. Attach the plastic cold water hose from the water inlet connection to the inlet side of the filter. Use N.S.F. or
15. Unwrap the bottle rail and bottle cap catch pan. Position them over the
16. Unwrap the sliding cover and place into frame on top of the ice bin.
Installation - Portable model
WARNING
Excessive Weight Hazard
Use two or more people to move and install bar cart.
Failure to do so can result in back or other injury.
Use a certified plumber to connect and install potable water supply and drain system to outdoor bar cart per local code requirements.
1. Make sure you have adequate drain connections for the Bar Cart.
2. Remove the bottle rail, bottle cap catch pan and water filter from the ice bin.
3. Remove the faucet from the sink.
sink
washer 
locknut
4. Install the faucet and fasten securely.
plumbers putty
5. Place a small amount of plumbers putty around both the ice bin and sink drain mounting seats.
drain
washer locknut
6. Ice bin drain and sink drain fittings to be connected to drain system in accordance with local code requirements.
7. Install the 1" (2.5 cm) drain fitting in the ice bin and the
4
