CARE AND CLEANING
Always clean the appliance and its attachments after use and before storing.
1.Unplug Commercial Immersion Blender before cleaning.
2.Remove the attachments by twisting (see "Operating Your Commercial Immersion Blender" section).
3.Wipe the motor body and attachments with a damp cloth. Mild dish soap may be used, but do not use abrasive cleansers.
NOTE: Do not immerse the motor body in washing solution, rinse water or sanitizing solution.
4.Wipe power cord with warm, sudsy cloth; then wipe clean with damp cloth. Dry with soft cloth.
Commercial Immersion Blender Attachments
Wash blending attachments in hot, soapy water, or in the dishwasher. Dry thoroughly.
English
TROUBLESHOOTING
If the Commercial Immersion Blender has stopped working, check for the following:
Unit has been unplugged
•Release the power button
•Check the power supply
•Restart the Commercial Immersion Blender as instructed in "Operating Your Commercial Immersion Blender"
Machine has overheated
•Release the power button
•Unplug the unit
•Wait a few minutes for the motor to cool down and the thermal safety mechanism to reset
•Restart the Commercial Immersion Blender as instructed in "Operating Your Commercial Immersion Blender"
Unknown
•Release the power button
•Unplug the unit
•Check the following:
-electrical plug for damage
-blades for freedom of movement (food may be lodged between blades and plastic guard
-power cord for cuts or other damage
-drive shaft for freedom of rotation (check by removing the attachment arm and rotating the shaft manually)
11
