Tones
Tones are audible signals, indicating the following:
One Tone
■Valid entry (short tone)
Two Tones
■Between stages (short tones)
■Reminder, repeat each minute for 10 minutes after the end-
■End of Timer countdown
■Hidden feature entered or exited (very short, quick tones)
Three Tones
■Invalid entry (very short, quick tones)
■Retry Error
Four Tones
■End of cycle (2 short tones, followed by 2 longer tones)
■Interruption, tend to food (short tones)
■Attention - door needs to be opened and closed
To Adjust Tone Volume:
1.On Main Menu, touch “Settings & Info.”
2.On Settings & Info screen, touch “More Choices.”
3.Touch “Volume.”
4.Using “+” and
5.Touch “OK.”
Start
The START control will start any function.
If
For added convenience, the “Start” touch pad is also available on some display screens, and provides the same function as the START control pad.
Off
The OFF control stops all functions except for the Timer and Learning Mode, and cancels programming in progress.
The microwave oven will also turn off when the door is opened. Close the door and touch START control or “Continue” on the touch screen to resume the cycle. A sensor cooking cycle may not be resumed if interrupted by opening the door.
Clear
During programming, the CLEAR control changes the numeric programming values, such as minutes, seconds and cook power that are active in the display to their default value. For example, while entering a cook time, touching CLEAR will change the time you have already entered to “0:00.” The CLEAR control gives an invalid signal (see “Tones” section) if touched during cooking.
Timer
The Timer can be set in minutes and seconds, up to 99 minutes, and counts down the set time.
NOTE: The Timer does not start or stop the microwave oven.
A |
A. Timer indicator
While the Timer is in use, the microwave oven can still operate. During an microwave oven operation, the Timer countdown will be minimized. If the Timer ends while microwave oven is still operating, the
To Set Timer:
1.Touch TIMER control.
2.Using the number pads, enter desired time in minutes and seconds, and then touch “Start Timer.”
The countdown will be in full screen view.
3.Touch “OK” to minimize the timer.
To see the countdown in full screen view, touch TIMER control.
The time can be reset during the countdown by touching TIMER, entering a new time, then touching “OK,” or the START control.
To Cancel: Touch TIMER control, then touch “Cancel Timer.”
Control Lock
The Control Lock disables all controls to prevent unintended use of the microwave oven. The only control that will function while the Control Lock is active is the OFF pad on the control panel.
Control Lock activation is possible only when the display is at the Main Menu.
To Activate Control Lock: Touch and hold OFF control for
5 seconds. Two tones will sound, and the display will show the padlock icon.
12
