KitchenAid KUDD01DPPA LoadingSilverware Basket, To remove either insert, To install either insert

To remove either insert

1.Gently pull in and up on the handle to release the insert handle from the base rack.

2.Once the handle is lifted up, tilt the insert to the left or right to

release the insert legs on the other end from their position under the base rack wire.

Load the silverware basket while it is in the rack or take the basket out for loading on a counter or table. The silverware basket can be removed for easy unloading.

Use the center section with cover down to load silverware in set positions and avoid nesting. Mix items in end sections of the basket with some pointing up and some down to avoid nesting. Spray cannot reach nested items.

To install either insert

1.Tilt the rack insert end to the left or right to insert the legs under the base rack wires as shown below.

21

2.Straighten the insert into position along the bottom of the base rack.

3.Gently pull in and push down on the insert handle until the insert locks into position in the base rack.

Place small items such as baby bottle caps, jar lids, corncob holders, etc., in the middle section with the hinged cover. Close the cover over the section to hold small items in place.

LoadingSilverware Basket

The FLEXI-BASKET™ silverware basket can be separated and placed into the rack in several locations. Hold joined basket firmly and slide each basket until the tab aligns with the keyhole on the back of each basket and pull apart. Now use both sections or just one to load silverware.

To remove the center basket cover

1.Slide the cover to one side until one hinge end pops out of the holder.

2.Tilt cover and slide in the opposite direction until the other hinge end pops out of holder. Remove cover.

8