INSTALLATION INSTRUCTIONS
Tools and Parts
TOOLS NEEDED:
Gather the required tools and parts before starting installation.
Read and follow the instructions provided with any tools listed here.
Install Overlay Hooks
Using a Phillips screwdriver and eight
■Hand drill or electric drill (properly grounded)
■¹⁄₂" Brad point doweling drill bit
■Phillips screwdriver
PARTS NEEDED:
■Scissors
■Masking tape
■Tape measure
■Petroleum jelly
A
Custom Overlay Door
Hardware (Optional)
PARTS SUPPLIED:
■ | ■ | Overlay plates (2) | |
■ | ■ | Overlay hooks (4) |
Custom Overlay Panel
If you plan to install a custom overlay panel, you will need to create the panel yourself or consult a qualified cabinetmaker or carpenter. See dimension drawings for panel specifications.
IMPORTANT:
■The thickness of the wood overlay must be ³⁄₄" (1.91 cm).
■Overlay panel must not weigh more than 20 lbs (9.07 kg).
■Overlay panel weighing more than recommended may cause damage to your refrigerator.
Overlay
Create the custom overlay panel using the dimensions shown.
A. Overlay hooks (4)
Door Hinge Holes
■The views of the top and bottom hinge pin hole show a right- hand hinge. Mirror the image for a
■We recommend using a
1.Using a ¹⁄₂" Brad point doweling drill bit, drill a ¹⁄₂" (1.27 cm) deep hole into the top of the overlay panel for the top hinge pin as shown.
1⁵⁄₁₆"
(3.33 cm)
A
4¹³⁄₃₂"
(11.2 cm)
29⁷⁄₈"
(75.88 cm)
Top View
| ¹⁄₂" |
A | (1.2 cm) |
|
Front Surface
¹⁷⁄₃₂" 
(1.35 mm)
Back Surface
A. Radius 5.0
2.Drill a ¹⁄₂" (1.27 cm) deep hole in the bottom of the overlay panel for the bottom hinge pin as shown.
1⁵⁄₁₆" 
2¹⁄₂" (3.33 cm)
(6.4 cm)
23³⁄₄" 
(60.33 cm)
A. Overlay hook locations
4
