Adjusting Digital Controls
NOTE: Wait at least 24 hours between adjustments. Recheck the temperatures before other adjustments are made.
To adjust set point temperatures:
■Press the refrigerator or freezer PLUS (+) or MINUS
NOTE: The set point range for the freezer is
CONDITION/REASON: | TEMPERATURE |
| ADJUSTMENT: |
|
|
REFRIGERATOR too cold | REFRIGERATOR Control 1° |
Not set correctly for conditions | higher |
| |
|
|
REFRIGERATOR too warm | REFRIGERATOR Control 1° |
High use or room very warm | lower |
| |
|
|
FREEZER too cold | FREEZER Control 1° higher |
Not set correctly for conditions |
|
|
|
FREEZER too warm/too little | FREEZER Control 1° lower |
ice |
|
High use or heavy ice use |
|
|
|
|
|
Additional Digital Control Panel Features
Additional features are located on the control panel at the top of the refrigerator compartment.
WATER FILTER Status & Reset
NOTE: Do not use with water that is microbiologically unsafe or of unknown quality without adequate disinfection before or after the system.
The water filter display will help you know when it is time to change your filter. To change the filter, see the “Water Filtration System” section.
INDICATOR: | STATUS: |
|
|
99 percent | New filter installed |
|
|
10 percent | Order replacement filter |
|
|
0 percent or flow decreases | Replace filter |
|
|
■After replacing the water filter, press RESET and hold for 2 seconds to change the water filter display to 99 percent.
Max Cool
The Max Cool feature assists with periods of heavy ice usage, full grocery loads, or temporarily warm room temperatures.
■Press MAX COOL to turn on the Max Cool feature. The Max Cool indicator light will remain on for 24 hours unless manually turned off.
NOTE: The temperature display will not change. After 24 hours, the refrigerator returns to the previous temperature set points.
Over Temperature Reset
The Over Temperature feature is designed to let you know when either the refrigerator temperature rises above 48°F (9°C) or the freezer temperature rises above 15°F
1¹⁄₂ hours. The audio alarm will shut off automatically when the temperature returns to normal, but the indicator light will continue to flash to let you know that an over temperature condition has occurred.
IMPORTANT: If the Over Temperature Alarm activates, your food may spoil. See the “Power Interruptions” section for more information and minimize door openings until temperatures return to normal.
■Press OVER TEMPERATURE RESET to turn off the audio alarm and flashing indicator light.
■The Over Temperature feature will continue to activate every 1¹⁄₂ hours until refrigerator and freezer temperatures are below 48°F (9°C) and 15°F
Holiday Mode
The Holiday Mode feature is designed for the traveler who wishes to save additional energy or for those whose religious observances require turning off the lights and ice maker. By selecting this feature, the temperature set points remain unchanged, the ice maker will be disabled and the interior lights will turn off.
■Press HOLIDAY MODE to turn on the Holiday Mode feature. This feature will remain on until the Holiday Mode key is pressed again.
NOTE: If the Max Cool feature has been selected prior to turning on the Holiday Mode feature, then the set points will remain at 32°F (0°C) and
Call Service
If the Call Service indicator light is flashing, call for service. See the “Assistance or Service” section for information on calling for service.
7