4.Do not lean over the sear burner. Push in and turn the sear burner control knob to LITE/HI, while continuing to hold it in.

5.You will see the igniter glow. When burner is lit, release the knob. Turn knob to desired setting.

IMPORTANT: If burner does not light immediately, turn the burner knob to OFF and wait 5 minutes before relighting.

■Preheat sear burner on high for 5 minutes. Preheating provides the high heat needed to brown and seal the juices.

■Shorten the preheat time when grilling high-fat cuts of meat or poultry, such as chicken thighs. This will help reduce flare-ups.

5.Do not lean over the sear burner. Push in and turn the burner knob to LITE/HI. The burner will light immediately. When burner is lit, turn knob to desired setting.

6.Remove match and replace manual lighting extension inside its holder.

IMPORTANT:

If burner does not light immediately, turn the burner knob to OFF and wait 5 minutes before relighting.

If any burners do not light after attempting to manually light them, contact the KitchenAid Customer eXperience Center. See the “Assistance or Service” section.

Manually Lighting Infrared Sear Burners

Using Your Infrared Sear Burner

1.Remove the outdoor sear burner cover.

2.Remove the manual lighting extension (see following illustration) and attach a match to the split ring.

3.Strike the match to light it.

4.Guide the lit match between the grate and the burner cover.

Infrared grilling produces intense heat which quickly sears the meat. Searing locks in flavor and juices while allowing the outer surface to absorb smoke and food aroma that is produced as grease and drippings are vaporized by the burner. The result is a crisp, flavorful outside with a tender, juicy inside.

■Preheat the infrared sear burner for 5 minutes.

■Ensure that meats are fully thawed and that all excess fat is trimmed away prior to grilling.

■Leave the burner set to HI when placing food on the grill to sear.

■Use the sear burner to sear meat 1 to 2 minutes on each side, then move the meat to the main grill cooking surface to finish grilling to the desired doneness.

NOTE: View is shown with grate removed. Grate is to be in place when using the infrared sear burner.

OUTDOOR SEAR BURNER CARE

General Cleaning

IMPORTANT: Before cleaning, make sure all controls are off and the sear burner is cool. Always follow label instructions on cleaning products.

For routine cleaning, wash with soap and water using a soft cloth or sponge. Rinse with clean water and dry at once with a soft, lint-free cloth to avoid spots and streaks.

Do not use steel wool to clean the sear burner, as it will scratch the surface.

To avoid weather damage to finish, use stainless steel sear burner cover.

STAINLESS STEEL

IMPORTANT: Do not use soap-filled scouring pads, abrasive cleaners, Cooktop Polishing Creme, steel wool, gritty wash cloths or paper towels.

To avoid damage to the finish, cleaners should not contain chlorine.

Food spills should be cleaned as soon as entire sear burner is cool. Spills may cause permanent discoloration.

10

Page 9 Page 11
Page 10
Image 10
KitchenAid W10117506B Outdoor Sear Burner Care, General Cleaning, Manually Lighting Infrared Sear Burners, Stainless Steel
Page 9 Page 11

W10117506B specifications

The KitchenAid W10117506B is a versatile and innovative appliance that has quickly become a favorite among both professional chefs and home cooks. Designed to enhance the culinary experience, this kitchen gadget boasts a range of features, technologies, and characteristics that set it apart from its competitors.

One of the standout features of the KitchenAid W10117506B is its powerful motor. The appliance is equipped with a robust motor that allows for seamless mixing and blending, making it easy to whip up dough, batter, and various ingredients in no time. This powerful motor ensures consistent results, reducing the effort and time needed for food preparation.

The design of the W10117506B is both ergonomic and aesthetically pleasing. Its sleek lines and polished finish will complement any kitchen décor, while the compact size allows for easy storage. The user-friendly interface includes intuitive controls that make it simple to adjust speeds and settings, offering full control over the mixing process.

Another key technology in the KitchenAid W10117506B is its planetary mixing action. This innovative design rotates the mixing attachment around the bowl while also spinning around its axis, ensuring that all ingredients are thoroughly incorporated. This feature is particularly useful for achieving perfectly blended mixtures without the dreaded lumps or clumps that can occur with less advanced appliances.

In addition to its mixing capabilities, the W10117506B offers several attachments that enhance its functionality. These attachments allow users to perform a variety of tasks, such as kneading dough, shredding vegetables, or even making pasta. The versatility of this appliance makes it a valuable addition to any kitchen.

The construction of the KitchenAid W10117506B also deserves mention. Built from high-quality materials, it is designed for durability and longevity. This means that users can rely on it for years of dependable service without worrying about wear and tear.

In conclusion, the KitchenAid W10117506B is a must-have for anyone who spends time in the kitchen. Its powerful motor, ergonomic design, innovative mixing technology, versatile attachments, and durable construction make it an indispensable tool for culinary enthusiasts. Whether you are baking, whipping, or mixing, this appliance is sure to elevate your cooking experience to new heights.
Top Page Image Contents