ElectronicIgnitionSystem

WARNING

Electrical Shock Hazard

Plug into a grounded 3 prong outlet.

Do not remove ground prong.

Do not use an adapter.

Do not use an extension cord.

Failure to follow these instructions can result in death, fire, or electrical shock.

7.Plug into a grounded 3 prong outlet.

Initial lighting and gas flame adjustments

Cooktop and oven burners use electronic igniters in place of standing pilots. When the cooktop control knob is turned to the “LITE” position, the system creates a spark to light the burner. This sparking continues, as long as the control knob is turned to “LITE.”

When the oven control is turned to the desired setting, sparking occurs and ignites the gas.

Check Operation of Cooktop Burners

Standard Surface Burners

Push in and turn each control knob to the “LITE” position.

The flame should light within 4 seconds. The first time a burner is lit it may take longer than 4 seconds to light because of air in the gas line.

TripleTier® Flame Burner

To start simmer burner:

Push in and turn control knob to “LITE” to start the inner burner.

The flame should light within 4 seconds. The first time a burner is lit it may take longer than 4 seconds to light because of air in the gas line.

To start power burner:

Push in control knob again and turn to “POWER BURNER HI” to light the outer burner.

The flame should light within 4 seconds. The first time a burner is lit it may take longer than 4 seconds to light because of air in the gas line.

If burners do not light properly:

■Turn cooktop control knob to the “OFF” position.

■Check that the range is plugged in and the circuit breaker has not tripped or the household fuse has not blown.

■Check that the gas shutoff valves are set to the “open” position.

■Check that burner caps are properly positioned on burner bases.

Repeat start-up. If a burner does not light at this point, turn the control knobs to “Off” and contact your dealer or authorized service company for assistance.

Adjust Flame Height

Adjust the height of top burner flames. The cooktop “low” burner flame should be a steady blue flame approximately ¼" (0.64 cm) high.

A.Low flame

B.High flame

To adjust standard burners:

The flame can be adjusted using the adjustment screw in the center of the valve stem. The valve stem is located directly underneath the control knob.

A. Valve stem

If the “low” flame needs to be adjusted:

1.Remove the control knob.

2.Hold the knob stem with a pair of pliers. Use a small flat- blade screwdriver to turn the screw located in the center of the control knob stem until the flame is the proper size.

3.Replace the control knob.

4.Test the flame by turning the control from “LO” to “HI,” checking the flame at each setting.

To adjust TripleTier® Flame burner:

1.Remove the control knob.

2.Insert a flat-blade screwdriver into adjustment locations shown in the following illustration and engage the slotted screw. Turn the screw until the flame is the proper size.

A.Simmer burner regulation

B.Power burner regulation

3.Replace the control knob.

4.Test the flame by turning the control from “LO” to “HI,” checking the flame at each setting.

W10118262B specifications

The KitchenAid W10118262B is a highly regarded essential for modern kitchens, designed to enhance both functionality and style. This versatile and efficient appliance is part of KitchenAid's commitment to quality and innovation, making it a must-have for home chefs and baking enthusiasts alike.

One of the standout features of the W10118262B is its impressive capacity. With adequate room to accommodate various dishes, it seamlessly handles everything from batch baking to meal prepping for larger gatherings. This spacious design reduces the need for multiple cooking sessions, allowing users to save time and energy.

The appliance boasts advanced heating technologies that ensure even and consistent cooking results. Combined with its powerful heating elements, the W10118262B is capable of achieving precise temperature control, which is crucial for achieving that perfectly baked soufflé or evenly roasted chicken. This level of control is facilitated by an intuitive digital interface, offering users the ability to select and monitor temperature settings with ease.

Another notable characteristic of the W10118262B is its array of built-in cooking modes. It features multiple options that cater to different methods, such as baking, broiling, and steaming. This multifunctionality not only broadens the culinary possibilities but also allows for creativity in the kitchen. Additionally, the appliance is equipped with smart features, enabling connectivity that can be controlled via mobile devices, making it easier to manage cooking processes from anywhere in the home.

Cleaning the KitchenAid W10118262B is made simple due to its removable components and non-stick surfaces. This thoughtful design plays a vital role in maintaining hygiene and convenience, essential in any busy kitchen.

Lastly, the sleek and modern aesthetic of the W10118262B complements any kitchen decor, enhancing its overall look while providing practicality. It is available in various color options, allowing users to choose one that best fits their style.

In summary, the KitchenAid W10118262B is an exemplary kitchen appliance, combining ample capacity, advanced cooking technology, versatile modes, and an appealing design. It stands as a testament to KitchenAid's dedication to helping home chefs elevate their culinary experience. Whether for daily cooking or special occasions, this appliance is sure to deliver on performance and style.

KitchenAid W10118262B installation instructions ElectronicIgnitionSystem

Models: W10118262B