KitchenAid W10118262B Installation Requirements, ToolsandParts, Location Requirements

Models: W10118262B

1 40
Download 40 pages 31.28 Kb
Page 4
Image 4

INSTALLATION REQUIREMENTS

ToolsandParts

Gather the required tools and parts before starting installation. Read and follow the instructions provided with any tools listed here.

Rear Filler Strip (optional)

The filler strip may be used to fill a gap between the rear of the slide-in range and the wall in a freestanding range cutout.

A

Tools needed

Tape measure

Flat-blade screwdriver

Phillips screwdriver

Level

Hand or electric drill

Hammer

Wrench or pliers

Pipe wrench

¹⁵⁄₁₆" combination wrench

³⁄₈" nut driver

¹⁄₈" (3.2 mm) drill bit (for wood floors)

Marker or pencil

Masking tape

Pipe-joint compound resistant to LP gas

³⁄₁₆" (4.8 mm) carbide-tipped masonry drill bit (for concrete/ceramic floors)

Noncorrosive leak-detection solution

For LP/Natural Gas

Conversions

½" combination wrench

7 mm combination wrench

7 mm nut driver

Size T20 TORX®† screwdriver

B

B

C

Parts supplied

Check that all parts are included.

A

B

C

A.Anti-tip bracket

B.Plastic anchors (2)

C.#10 x ¹⁄₂" screws (2)

Anti-tip bracket must be securely mounted to subfloor. Thickness of flooring may require longer screws to anchor bracket to subfloor. Longer screws are available from your local hardware store.

Parts needed

Check local codes and consult gas supplier. Check existing gas supply and electrical supply. See “Electrical Requirements” and “Gas Supply Requirements” sections.

A. Filler strip

B.Countertop

C.Countertop cutout

To order, see the “Assistance or Service” section of the Use and Care Guide. Order Part Number W10113902A (black), W10113903A (white) or W10113904A (biscuit).

Location Requirements

IMPORTANT: Observe all governing codes and ordinances. Do not obstruct flow of combustion and ventilation air.

It is the installer’s responsibility to comply with installation clearances specified on the model/serial rating plate. The model/serial rating plate is located inside the oven door on the right-hand side oven door trim.

The range should be located for convenient use in the kitchen.

Recessed installations must provide complete enclosure of the sides and rear of the range.

To eliminate the risk of burns or fire by reaching over heated surface units, cabinet storage space located above the surface units should be avoided. If cabinet storage is to be provided, the risk can be reduced by installing a range hood or microwave hood combination that projects horizontally a minimum of 5" (12.7 cm) beyond the bottom of the cabinets.

All openings in the wall or floor where range is to be installed must be sealed.

Do not seal the range to the side cabinets.

Cabinet opening dimensions that are shown must be used. Given dimensions are minimum clearances.

The floor anti-tip bracket must be installed. To install the anti- tip bracket shipped with the range, see “Install Anti-Tip Bracket” section.

†®TORX is a registered trademark of Acument Intellectual Properties, LLC.

4

Page 4
Image 4
KitchenAid W10118262B installation instructions Installation Requirements, ToolsandParts, Location Requirements

W10118262B specifications

The KitchenAid W10118262B is a highly regarded essential for modern kitchens, designed to enhance both functionality and style. This versatile and efficient appliance is part of KitchenAid's commitment to quality and innovation, making it a must-have for home chefs and baking enthusiasts alike.

One of the standout features of the W10118262B is its impressive capacity. With adequate room to accommodate various dishes, it seamlessly handles everything from batch baking to meal prepping for larger gatherings. This spacious design reduces the need for multiple cooking sessions, allowing users to save time and energy.

The appliance boasts advanced heating technologies that ensure even and consistent cooking results. Combined with its powerful heating elements, the W10118262B is capable of achieving precise temperature control, which is crucial for achieving that perfectly baked soufflé or evenly roasted chicken. This level of control is facilitated by an intuitive digital interface, offering users the ability to select and monitor temperature settings with ease.

Another notable characteristic of the W10118262B is its array of built-in cooking modes. It features multiple options that cater to different methods, such as baking, broiling, and steaming. This multifunctionality not only broadens the culinary possibilities but also allows for creativity in the kitchen. Additionally, the appliance is equipped with smart features, enabling connectivity that can be controlled via mobile devices, making it easier to manage cooking processes from anywhere in the home.

Cleaning the KitchenAid W10118262B is made simple due to its removable components and non-stick surfaces. This thoughtful design plays a vital role in maintaining hygiene and convenience, essential in any busy kitchen.

Lastly, the sleek and modern aesthetic of the W10118262B complements any kitchen decor, enhancing its overall look while providing practicality. It is available in various color options, allowing users to choose one that best fits their style.

In summary, the KitchenAid W10118262B is an exemplary kitchen appliance, combining ample capacity, advanced cooking technology, versatile modes, and an appealing design. It stands as a testament to KitchenAid's dedication to helping home chefs elevate their culinary experience. Whether for daily cooking or special occasions, this appliance is sure to deliver on performance and style.