Adjust LevelingLegs

1.If range height adjustment is necessary, use a wrench or pliers to loosen the 4 leveling legs.

This may be done with the range on its back or with the range supported on 2 legs after the range has been placed back to a standing position.

NOTE: To place range back up into a standing position, put a sheet of cardboard or hardboard in front of range. Using 2 or more people, stand range back up onto the cardboard or hardboard.

WARNING

Tip Over Hazard

A child or adult can tip the range and be killed.

Connect anti-tip bracket to rear range foot.

Reconnect the anti-tip bracket, if the range is moved.

Failure to follow these instructions can result in death or serious burns to children and adults.

2.Adjust the leveling legs to the correct height. Leveling legs can be loosened to add up to a maximum of 1" (2.5 cm). A minimum of ³⁄₁₆" (5.0 mm) is needed to engage the anti-tip bracket.

NOTE: If height adjustment is made when range is standing, tilt the range back to adjust the front legs, then tilt forward to adjust the rear legs.

3.When the range is at the correct height, check that there is adequate clearance under the range for the anti-tip bracket. Before sliding range into its final location, check that the anti- tip bracket will slide under the range and onto the rear leveling leg prior to anti-tip bracket installation.

InstallAnti-TipBracket

Contact a qualified floor covering installer for the best procedure for drilling mounting holes through your type of floor covering.

Before moving range, slide range onto shipping base, cardboard or hardboard.

1.Remove template from the anti-tip bracket kit (found inside the oven cavity) or from the back of this manual.

2.Place template on the floor in cabinet opening so that the left edge is against cabinet and top edge is against rear wall, molding or cabinet.

3.Tape template into place.

4.If countertop is not flush with cabinet opening edge, align template with overhang.

If cabinet opening is wider than that specified in the “Location Requirements” section, adjust template so range will be centered in cabinet opening.

5.To mount anti-tip bracket to wood floor, drill two ¹⁄₈" (3.2 mm) holes at the positions marked on the bracket template. Remove template from floor.

To mount anti-tip bracket to concrete or ceramic floor, use a ³⁄₁₆" (4.8 mm) masonry drill bit to drill 2 holes at the positions marked on the bracket template. Remove template from floor. Tap plastic anchors into holes with a hammer.

6.Align anti-tip bracket holes with holes in floor. Fasten anti-tip bracket with screws provided.

Depending on the thickness of your flooring, longer screws may be necessary to anchor the bracket to the subfloor. Longer screws are available from your local hardware store.

7.Move range close enough to opening to allow for final electrical connection. Remove shipping base, cardboard or hardboard from under range.

8.Move range into its final location making sure rear leveling leg slides into anti-tip bracket.

9.If installing the range in a mobile home, you must secure the range to the floor. Any method of securing the range is adequate as long as it conforms to the standards in the “Location Requirements” section.

10.Continue installing your range using the following installation instructions.

10

Page 9 Page 11
Page 10
Image 10
KitchenAid W10118262B installation instructions Adjust LevelingLegs, InstallAnti-TipBracket
Page 9 Page 11

W10118262B specifications

The KitchenAid W10118262B is a highly regarded essential for modern kitchens, designed to enhance both functionality and style. This versatile and efficient appliance is part of KitchenAid's commitment to quality and innovation, making it a must-have for home chefs and baking enthusiasts alike.

One of the standout features of the W10118262B is its impressive capacity. With adequate room to accommodate various dishes, it seamlessly handles everything from batch baking to meal prepping for larger gatherings. This spacious design reduces the need for multiple cooking sessions, allowing users to save time and energy.

The appliance boasts advanced heating technologies that ensure even and consistent cooking results. Combined with its powerful heating elements, the W10118262B is capable of achieving precise temperature control, which is crucial for achieving that perfectly baked soufflé or evenly roasted chicken. This level of control is facilitated by an intuitive digital interface, offering users the ability to select and monitor temperature settings with ease.

Another notable characteristic of the W10118262B is its array of built-in cooking modes. It features multiple options that cater to different methods, such as baking, broiling, and steaming. This multifunctionality not only broadens the culinary possibilities but also allows for creativity in the kitchen. Additionally, the appliance is equipped with smart features, enabling connectivity that can be controlled via mobile devices, making it easier to manage cooking processes from anywhere in the home.

Cleaning the KitchenAid W10118262B is made simple due to its removable components and non-stick surfaces. This thoughtful design plays a vital role in maintaining hygiene and convenience, essential in any busy kitchen.

Lastly, the sleek and modern aesthetic of the W10118262B complements any kitchen decor, enhancing its overall look while providing practicality. It is available in various color options, allowing users to choose one that best fits their style.

In summary, the KitchenAid W10118262B is an exemplary kitchen appliance, combining ample capacity, advanced cooking technology, versatile modes, and an appealing design. It stands as a testament to KitchenAid's dedication to helping home chefs elevate their culinary experience. Whether for daily cooking or special occasions, this appliance is sure to deliver on performance and style.
Top Page Image Contents