KitchenAid W10242569B manual Location Requirements, Electrical Requirements

13.Remove the shipping base from the bottom of the compactor.

Clearance Dimensions

A B

A. Leveling legs

B. Shipping base

Location Requirements

Product Dimensions

B

A

34¹⁄₈"

(86.7 cm)

15"

24"

A. Leave 6" (15.2 cm) of clearance space to the right side of the compactor in order to remove the compactor bags.

B. Leave 23" (58.4 cm) of clearance in front of the compactor in order to fully open or remove the compactor drawer.

Electrical Requirements

WARNING

(38.1 cm)

Cutout Dimensions

3" min.

(61 cm)

Electrical Shock Hazard

Plug into a grounded 3 prong outlet.

Do not remove ground prong.

Do not use an adapter.

Do not use an extension cord.

Failure to follow these instructions can result in death, fire, or electrical shock.

Recommended Grounding Method

(7.6 cm)

A

34¹⁄₄" min.

(87 cm)

24" min.

(61 cm)

18" min. (45.7 cm)

15¹⁄₄" min.

(38.7 cm)

A. Grounded eletrical outlet must be a minimum of 3" (7.6 cm) away from surrounding cabinets or nearby walls as shown. It can be placed either to the left or the right side of the compactor.

This compactor is for use on a single phase, 115-volt, 60 Hz, AC only, 15- or 20-amp fused and properly grounded circuit and is equipped with a grounding plug as shown below. It is recommended that a separate circuit serving only this appliance be provided.

This compactor must be grounded while in use to reduce the risk of electric shock. The compactor is equipped with a three- conductor cord and 3 prong grounding-type plug to fit the proper grounding-type receptacle. The green (or green and yellow) conductor in the cord is the grounding wire.

NOTE: Do not connect the green (or green and yellow) wire to a live terminal.

4