Medium Burner
AA. Burner cap
B.Burner head
BC. Gas opening
CD. Burner base
A | Small Burner | |
A. Burner cap | ||
|
Replace Igniter - Small Surface Burners Only
1.Unplug igniter wire from electrode.
IMPORTANT: Do not let the igniter wire fall down under the cooktop surface.
2.Using
B | B. Burner head |
| C. Gas opening |
C | D. Burner base |
D |
|
A
B
5.Apply masking tape to the end of a 7 mm nut driver to help hold the gas orifice spud in the nut driver while changing it. Insert nut driver into gas opening and press down onto the gas orifice spud and remove by turning the gas orifice spud counterclockwise and lifting out. Set gas orifice spud aside.
6.Replace with correct LP gas orifice spud. See the “LP Gas Orifice Spud/Hood Chart.”
Use the following chart to find the exact orifice spud placement.
LP Gas Orifice Spud/Hood Chart
Burner | Color | Size | Burner Style |
Rating |
|
|
|
|
|
|
|
3,000 BTU | Blue | 0.55 mm | Small burners |
12,500 BTU Brass 1.04 mm Medium burners
15,500 BTU Yellow | 1.05 mm | Large burner - main |
Green | 0.45 mm | Large burner - simmer |
C
A.Retaining clip
B.Spring
C.Natural gas igniter
3.Remove Natural gas igniter from burner base.
4.Place spacer ring onto the LP gas igniter and insert into the burner base.
A
A.Spacer
5.Insert new spring from LP conversion kit onto the underside of the igniter and lock into place with the new retaining clip.
A
B
14,500 BTU Black | 1.18 mm | Grill burner |
|
| |
Burner orifice spud | Grill orifice hood | |
A
A
A. Size stamp or color | A. Size stamp |
|
|
7.Place Natural gas orifice spuds in plastic parts bag for future use and keep with package containing literature.
8.For medium and large burners, replace the burner base using both screws. Replace burner head and cap.
For small burners, replace igniter using the following instructions.
C
A.Retaining clip
B.Spring
C.LP gas igniter
6.Place Natural gas igniter, spring, and clip in plastic parts bag for future use and keep with package containing literature.
7.Plug in igniter wire.
8.Replace the burner base using both screws.
9.Replace burner head and cap.
15
