CompleteInstallation

Install Burner Heads and Caps

Install the burner head, making sure the alignment pins are properly aligned with the burner base. Place burner cap (black) on top of the burner head.

20,000 Btu/h Ultra Power™ Dual-Flame Burner

A

A. Incorrect

B. Correct

B

15,000 Btu/h Professional Burner

A

A. Incorrect

B. Correct

B

5,000 Btu/h Simmer/Melt Burner

A

A. Incorrect

B. Correct

B

Electronic Ignition System

Initial lighting and gas flame adjustments

Cooktop burners use electronic igniters in place of standing pilots. When the cooktop control knob is turned to any position, the system creates a spark to light the burner. This sparking continues, until the flame is lit or the knob is turned to Off.

Check Operation of Cooktop Burners

Push in and turn each control knob to the “LITE” position.

The surface burners and grill flames should light within

4 seconds. The first time a burner is lit it may take longer than 4 seconds to light because of air in the gas line.

After verifying the proper burner operation, turn the control knobs to OFF.

If burners do not light properly:

Turn cooktop control knob to the “OFF” position.

Check that the cooktop is plugged in and the circuit breaker has not tripped or the fuse has not blown.

Check that the gas shutoff valves are set to the “open” position.

Check that burner caps are properly positioned on burner bases.

Repeat start-up. If a burner does not light at this point, contact your dealer or authorized service company for assistance.

If you need Assistance or Service:

Please reference the “Assistance or Service” section of the Use and Care Guide or contact the dealer from whom you purchased your cooktop.

Flame Height

The cooktop flame should be a steady blue flame approximately ¼" (0.64 cm) high.

Dual Flame Burner

A

B

A. Upper flame

B. Lower (simmer) flame

Single Flame Burner

To Adjust Flame Height:

1.Unplug cooktop or disconnect power.

2.Remove burner grates.

3.Remove the control knobs.

4.Pull cooktop forward to expose the control console screws on the side of the cooktop burner base.

5.Remove the 2 screws on each side of the cooktop burner base that hold the control console in place.

A

A. Console attachment screws

6.Disconnect wiring from the control console.

On Grill Models:

Support the control console in the middle with one arm and disconnect the grill indicator light with the other hand.

A

A. Grill indicator light connector

12

Page 12
Image 12
KitchenAid W10271686C installation instructions CompleteInstallation

W10271686C specifications

The KitchenAid W10271686C is an essential component for any kitchen that revolves around efficiency and culinary excellence. Recognized for its innovation and durability, this product represents KitchenAid's commitment to high-quality household appliances.

At the core of the W10271686C model is its impressive functionality. This replacement part is compatible with a variety of KitchenAid appliances, enhancing their performance and ensuring the smooth operation of your cooking experience. Its versatility is one of the leading characteristics that attract users, as it seamlessly fits into multiple appliance configurations.

One of the standout features of the W10271686C is its robust construction. Made from premium materials, the part is designed to withstand the rigors of daily use. This durability not only guarantees a longer lifespan but also minimizes the risk of wear and tear, keeping your kitchen running smoothly. Home cooks and professional chefs alike appreciate the reliability that comes with using a KitchenAid product.

The W10271686C also embodies advanced technology to optimize its performance. Enhanced with innovative design elements, this replacement part ensures that users have access to the latest advancements in kitchen technology. This not only improves efficiency but also leads to better cooking outcomes, empowering users to achieve culinary perfection.

Another significant characteristic of the W10271686C is its straightforward installation process. KitchenAid understands the importance of convenience in the fast-paced modern kitchen. With a user-friendly design, this product allows for quick replacements, making it easy for anyone to maintain their appliances without requiring professional assistance.

Moreover, the compatibility of the W10271686C with various models enhances its appeal. It supports a wide range of applications, simplifying the replacement process for countless users. This aspect minimizes the hassle often associated with sourcing kitchen appliance parts, as many users can rely on one trustable option.

In summary, the KitchenAid W10271686C is more than just a replacement part; it's an embodiment of quality, efficiency, and innovation. With its durable construction, advanced technology, easy installation, and wide compatibility, it serves as a crucial element for anyone looking to elevate their kitchen experience. Whether you are a culinary novice or a seasoned chef, this product is designed to meet your needs. By choosing KitchenAid, you invest in a brand that stands for excellence in kitchen appliances.