BEFORE YOU BEGIN | 5 |
Installing
Warning: Do not plug in the USB cable until after you have installed the software. Complete the installation steps in the order described in the installation procedure below.
Installation is a quick,
1.Assemble the scanner
2.Install the software
3.Connect the power supply
4.Connect the USB cable and turn on the power
BEFORE YOU BEGIN
Please make sure of the following before you begin installation:
■If your computer has AntiVirus or AntiSpyware software running, you may encounter alerts or messages during installation asking you to allow the installation to proceed. Although the messages will differ based on the software your computer is running, in each case you should allow the installation to proceed if that option is available. Alternatively, you can turn off the AntiVirus or AntiSpyware software before installing your scanner. But if you do, make sure to turn it back on again when installation is finished.
■If you already have a scanner connected to your computer, you may need to remove its driver programs first before beginning the installation of your Visioneer 9650 USB scanner. Please see “How to Uninstall Your Scanner” on page 143 for basic instructions, or see the User’s Guide that you received with your other scanner.
