Visioneer 9650 manual Connect the Power Supply, To connect the power supply

16VISIONEER 9650 SCANNER USER’S GUIDE

STEP 3: CONNECT THE POWER SUPPLY

Connect the power supply and power cord, and plug the power supply into an electrical outlet.

To connect the power supply:

1.Plug the power supply into its power port on the scanner.

Make sure the ADF cable is plugged in securely. If the cable is loose the ADF will not function properly.

Note: Only use the power supply (HEG42-240100-7L made by HiTRON) included with your scanner. Connecting any other type of power supply may damage your scanner and will void its warranty.

2. Plug the power cord into the power supply and into a wall outlet.

Now proceed to the next section, “Step 4: Connect the USB Cable and Turn on the Power.”