SCAN FROM THE ONETOUCH BUTTON PANEL

27

SCAN FROM THE ONETOUCH BUTTON PANEL

OneTouch is an application installed on your computer as part of the scanner installation process.

To scan from the OneTouch Button Panel:

1.Adjust the paper guide for the width of paper you want to scan, and load the documents with the top edge into the Automatic Document Feeder.

The OneTouch Icon. 2. Now click on the OneTouch icon in the Windows Notification Area (at the bottom right corner of the screen).

The OneTouch Button Panel opens and shows the first five on- screen scanning buttons. Click the arrows to cycle through the buttons to find the one you want to use for scanning.

Click the button you

Click these arrows

want to use to scan.

to navigate through

 

the buttons.

3. Click the button you want to use to scan.

For example, if you want to scan with button 2, which converts the document to PDF, click here.

Or if you want to scan with button 4, which attaches the scanned document to a blank email message, click here.

Page 34
Image 34
Visioneer 9650 manual Scan from the Onetouch Button Panel, To scan from the OneTouch Button Panel