124VISIONEER 9650 SCANNER USERS GUIDE

12.If necessary, adjust settings of the previewed image:

Change the button selection for the type of image.

Adjust the custom settings; refer to the next section, “Fine Tuning Your Scans”.

If you’re scanning from the Flatbed, change the size of the scanned image. To do this, click and hold the mouse pointer over one of the four sizing-boxes on the corners of the previewed image. Then drag the box to increase or decrease the size of the image.

If you’re scanning from the ADF, choose a new page size from the drop-down menu,

13.Preview the image again. When you are satisfied with the image, click the Scan button.

If the Create single page items check box is selected on the Scan pane, the scanned item appears as a thumbnail on the PaperPort desktop.

If the Create single page items check box is not selected, thumbnails do not appear until you indicate the scanning job is finished.

14.On the PaperPort Scan message box, click Done.

When scanning is finished, a thumbnail of the scanned image(s) appears on the PaperPort desktop.

Single page items appear as individual thumbnails on the PaperPort desktop.

Page 131
Image 131
Visioneer manual Visioneer 9650 Scanner USER’S Guide