CONFIGURING THE ONETOUCH BUTTONS 77
3. Select the scan configuration Configure Before Scan.
Click the arrows to select the button.
Select Configure
Before Scan.
Right-click on Configure Before Scan to get the menu, and choose the interface to use for scanning.
4.Right-click on Configure Before Scan and choose an interface to use for scanning.
TWAIN—The TWAIN Interface opens for you to make changes prior to scanning. See “Accessing the TWAIN Interface from PaperPort” on page 93.
ISIS—The ISIS Interface opens for you to make changes prior to scanning. See “Scanning with the ISIS Interface” on page 127.
WIA—The Windows Image Acquisition Interface (WIA) opens for you to make changes prior to scanning (available on Windows XP only). See “Scanning with the WIA Interface” on page 119.
Note: choosing Configure Before Scan simply opens the scanning interface when you press or click a scan button. You can then use the interface to change the Resolution, Scan Mode, and other settings. When you scan, the scanned image will still be sent as the file type and to the same Destination Application already selected in the OneTouch Properties window for that button.
5. Click OK or Apply on the OneTouch Properties window.
