USING THE ONETOUCH BUTTON PANEL 31

Note: The configurations shown on this example of the OneTouch Properties window are for illustration purposes only. The configurations you see on your OneTouch Properties window may be different.

2. Make the changes on the OneTouch Properties window.

3.Click OK to save the changes.

After the changes have been saved, the Detail View of the button will change to reflect your new settings.

4.To close the OneTouch Button Panel, click the close button on the panel.

Important: See “Configuring the OneTouch Buttons” on page 34 for the steps to make changes to the button settings.

Page 38
Image 38
Visioneer 9650 manual Using the Onetouch Button Panel