3.Remove foam strip from literature packing. Remove backing from foam strip. Apply foam strip
NOTE: The foam strip helps the cooktop sit flat on uneven counters and avoids damage to the countertop surface.
A
B
C
A. Cooktop base
B. Foam strip
C.Cooktop
4.Using 2 or more people, turn cooktop right side up.
InstallOptional Backguard
48" (121.9 cm) models and all models with a grill may require a backguard. See “Cabinet Dimensions” in the “Location Requirements” section for installation requirements. See the “Tools and Parts” section for information on ordering.
Remove island trim and attach backguard using 6 screws, insert 3 from the front and 3 from the back (9" [22.9 cm] backguard shown).
Make Gas Connection
WARNING
Explosion Hazard
Use a new CSA International approved gas supply line.
Install a
Securely tighten all gas connections.
If connected to LP, have a qualified person make sure gas pressure does not exceed 14" (36 cm) water column.
Examples of a qualified person include:
licensed heating personnel,
authorized gas company personnel, and authorized service personnel.
Failure to do so can result in death, explosion, or fire.
To Assemble Pressure Regulator:
1.Using 2 or more people, stand the cooktop on its side or back.
2.Connect the flexible stainless steel connector to the pressure regulator using a ¹⁄₂" male pipe thread adapter.
A combination of pipe fittings must be used to connect the cooktop to the existing gas line. Shown following is a typical connection. Your connection may be different, according to the supply line type, size and location.
A
B
C
D
A. Gas pressure regulator
B. Regulator - Must be installed with arrow pointing up to cooktop bottom
C. Adapter - Must have ¹⁄₂" male pipe thread
D. CSA approved flexible stainless steel gas supply line
3.Install the pressure regulator with the arrow pointing up toward the bottom of the cooktop burner base and in a position where you can reach the regulator cap.
IMPORTANT: All connections must be
9
