KMC BAC-10000 manual Overview Applications and Installation

Overview

Applications and Installation

The KMC FlexStat series of intelligent temperature/ humidity/occupancy-sensing, wall-mounted, ther- mostat/controllers are native BACnet Advanced Application Controllers (B-AAC) for use in a BAC- net system. The FlexStat simplifies networked zone control for common packaged HVAC equipment, such as packaged rooftop units, fan coil units, heat pumps, and other similar applications. In addi- tion, applications such as pressure dependent VAV, terminal reheat, and medium-sized central station air handling equipment applications may also be ad- dressed through the on-board libraries of programs built into the devices.

Communication with

Other BACnet Devices

	Optional
Temperature	Humidity
Sensing	and
	Motion
	Sensing
3 Analog	Up to 9
Inputs	Outputs
for Other	(Analog
Sensors or	and/or
Contacts	Relays)

Applications

•AHU

•FCU

•HPU

•RTU

The on-board library of programs permits rapid configuration of a wide range of HVAC control ap- plications.

The FlexStat series also provides the capability to customize the standard library of sequences using KMC’s BACstage programming tool. This enables a local authorized KMC installing contractor to adapt the standard library to the unique site needs and ap- plication specific requirements of a particular project.

Dimensions in		Terminal Blocks
inches (mm)		on Removable
		Backplate for
		Easy Wiring
	5.551
	(141)

1.125

(28.6)

EIA-485 Data Port for

Quick Network Access

24 Volts AC	Quick (Temporary) Network/
Power	Programming Access

1.Wire the FlexStat’s backplate to the desired equipment and set the FlexStat’s end-of-line and input pull-up resistor switches.

2.Select the relevant application and options from the (Advanced) Application submenu of the Advanced Menu and other appropriate menus.

3.Configure the FlexStat for the BACnet network. (See Network Connection on page 16.)

For general mounting and connection details, including network wiring, EOL termination, power connections, input/output connections, pull-up resistor switch settings, see the relevant model’s Installation Guide. For extended information about wiring and sequences for specific applications, see the BAC-10000 Series Application Guide.

BAC-10000 Series 2 Operation Guide, Rev. J