15
Table 1: LED behavior and meaning
LED color/behavior | Meaning |
Solid Green | The power switch has been toggled on |
| and the software has initialized or the |
| projector has been powered off via the |
| remote. |
|
|
Blinking Green | The power switch has been toggled on |
| and the software is initializing, or the |
| projector is powering down and the fans |
| are running to cool the lamp. |
|
|
Blinking Red | A fan or lamp failure has occurred. Make |
| sure the vents aren’t blocked (see page |
See page 18 for more information | 18). Turn off the projector and wait one |
| minute, then turn the projector on again. |
| If the projector exceeds its lamp life (page |
| 25), replace the lamp and reset the lamp |
| timer. Contact Technical Support if the |
| problem persists. |
|
|
Solid Red | An unidentifiable error; please contact |
| Technical Support. |
|
|
The following tables show common problems. In some cases, more than one possible solution is provided. Try the solutions in the order they are presented. When the problem is solved, you can skip the additional solutions.
