![To Replace Light Bulb](/images/new-backgrounds/77596/7759625x1.webp)
To Replace Light Bulb
CAUTION: HALOGEN LIGHT UNIT MAY BE HOT! WAIT UNTIL UNIT IS COOL.
1)Make sure all control switches are off, and range hood is unplugged.
2)Use a flat head screwdriver to pop out the protective covering as shown in F
3)Gently pull out the defective light bulb and discard. Light bulbs should b maximum. Refer to Figure 16. Push bulb securely into light socket.
4)Replace protective cover.
5)Plug in range hood.
Figure 15 | Figure 16 |
11