PROBLEM | POSSIBLE CAUSE | SOLUTION |
|
|
|
| 1.- Not firmly plugged in. | 1.- Check attachment plug. |
A) Motor does not work | 2.- Bad | 2.- Replace switch. |
3.- Line cord open | 3.- Replace cord. | |
| 4.- Motor open | 4.- Check motor and wiring. |
| 5.- Fan blockage by material | 5.- Remove obstruction |
B) Motor works but cleaner | 1.- Belt broken. | 1.- Replace belt. |
2.- Blockage air system. | 2.- Remove obstruction. | |
does not pick up/has suction | 3.- Fan broken. | 3.- Replace fan. |
| 4.- Worn brush roller. | 4.- Replace brush roller. |
| 5.- Motor slow. | 5.- Check carbon brushes. |
| 6.- Bag full. | 6.- Empty bag (or change paper bag). |
C) Motor works incorrectly | 1.- Worn carbon brushes. | 1.- Replace brushes. |
2.- Detective armature. | 2.- Check spark, replace | |
| 3.- Bad electrical connection. | 3.- Check wiring. |
| 4.- Detective | 4.- Replace switch. |
| 1.- Ball bearing worn out.. | 1.- Replace |
| 2.- Ball bearing holder |
|
D) Brush roll vibrates. | damaged | 2.- Replace ball bearing holder. |
5 |
