The Basics
61
Contents Back Next Index
Charging Batteries
1Plug the cable from the charger’s AC adapter
into the battery charger port.
2Select the appropriate included international
power cord and plug the AC adapter into a
wall outlet.
3Insert one or two batteries in the slots in the
battery charger. (Use either slot when
charging only one battery.)
On average, batteries are rapid-charged in
approximately 2 1/2 hours. If two batteries are
inserted, they are charged simultaneously.
The following table shows the battery charger
status as indicated by each state of the LEDs.
LEDs
Battery
charger port
1 Cannot rapid charge at this time. Slow charge may
be active.
2 Poor contact (reseat battery pack), battery pack is
bad, charger failure.
Battery Charger Status LED Display
Waiting to charge1Flashing Yellow
Charging Red
Charged (90% capacity) Flashing Green
Fully charged Green
Fault2Flashing Red