Using the Camera Connected to a Computer
77
Contents Back Next Index
Using the Camera Connected to a Computer
Getting Started
To start using your camera connected to a
computer, do the following.
☛It is not necessary to turn off the computer.
1Assemble the camera (page 50).
2Install the included software, as needed
(page 27).
3Connect the camera to the computer and
power supply (page 78).
4Turn on the computer, if it isn’t already.
5Start DCS Capture Studio or DCS Camera
Manager.
If DCS Capture Studio is running, images are
saved to the computer. If DCS Camera
Manager is running, images can be saved to
the computer or to a CF Card.
6Capture images.
7Review and edit the images, as needed, in
DCS Capture Studio, DCS Photo Desk, or
ADOBE PHOTOSHOP with the DCR File
Format Module.
8Save the images to the computer’s hard drive
in the desired format.
Before You Begin